Jump to content
Why become a member? ×

DIY Cab Isolator


V4lve
 Share

Recommended Posts

Hi.

Decided 50 quid was too much for a Gramma Pad so decided to make my own. Spent about half that. Most of it on a couple of Proel Isoblocks. The rest was a cheap door mat, some scrap strand board, black paint, UHU and a couple of screws.

The Proel blocks are interesting. Kind of a foam wood sandwich. The top is high density foam, the bottom is very coarse foam and the wood in the middle is very light. I tried them on their own straight under my 210 on a temporary hollow high stage in a very large school hall and there was no boominess at all. Pretty punchy.

Surprisingly the coarse foam doesn't collapse much. Only downsides are that the coarse foam makes the cab a little wobbly, which is a result of the de-coupling with the floor. And the high density foam is a little fragile. It dents easily, which is why I decided to make a board.

Looking forward to using the board now

Photos below. The small block under the front is a carry handle.



Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...