Sold Reduced to £60 Tapco Juice J.1400 Power Amp for Sale Sold £100

[King Tut]

[color=#141823][font=Helvetica, Arial,]For sale - Tapco Juice J.1400 power Amp[/font][/color]
[color=#141823][font=Helvetica, Arial,]Specs below. Power ratings are a bit optimistic but this'd happily run FOH PA (tops) for a small / medium venue or make a good monitor amp. Great, almost unused condition. A bargain at £60[/font][/color]

[color=#141823][font=Helvetica, Arial,][url="http://s1326.photobucket.com/user/Curvylovedog/media/75021932-8080-42ed-a94c-284ac5d18609_zps52bcfb02.jpg.html"][/url][/font][/color]

[color=#141823][font=Helvetica, Arial,][url="http://s1326.photobucket.com/user/Curvylovedog/media/07783016-a997-4505-a688-3512decdf1da_zpsa2892bd8.jpg.html"][/url][/font][/color]
[color=#141823][font=Helvetica, Arial,]Tapco by Mackie J1400 Juice Series Power Amplifier[/font][/color]

[color=#141823][font=Helvetica, Arial,]In developing these amps we devised a rigorous power amp test. It’s pure premium power. Continuous Sine Wave Average Output Power both channels driven 20 Hz to 20 kHz ~ 2 Ohms per channel @ 800W ~ 4 Ohms per channel @ 450W ~ 8 Ohms per channel @ 310W Bridged Mono Operation 20 Hz to 20 kHz ~ 4 Ohms per channel @ 1400W ~ 8 Ohms per channel @ 900W
FEATURES:
• J•1400 1400W @ 4 Ohms bridged.
• Easily switchable mono/stereo/bridged mono operating modes.
• Separate Speakon® outputs for Channel A and Channel B.
• Third Speakon output for mono bridged applications: also provides both output channels on a single NL4 connector.
• 30Hz subsonic filter for low-frequency speaker protection.
• Handles for easy transport and protection of level controls.
• Defeatable clip limiter.
• Front-panel signal and overload indication.
TECHNICAL SPECIFICATIONS:
Continuous Sine Wave Average Output Power, both channels driven, 20 Hz to 20 kHz
• 2 Ohms per channel @ 800W
• 4 Ohms per channel @ 450W
• 8 Ohms per channel @ 310W
Bridged Mono Operation, 20 Hz to 20 kHz
• 4 Ohms per channel @ 1400W
• 8 Ohms per channel @ 900W
• Power Bandwidth: - 5 Hz to 50 kHz ( 0, -3 dB)
• Frequency Response: - 25 Hz to 25 kHz ( 0, -1 dB)
&bull; Distortion: THD and SMPTE IMD; 20Hz to 20kHz < 0.03% @ 8 ohms
&bull; Signal-to-Noise Ratio: > 100 dB below rated power into 4 ohms
&bull; Channel Separation: > 90 dB @ 1 kHz
&bull; Damping Factor: > 300 @ 1 kHz and below
&bull; Input Impedance: 20 kO balanced 10 kO unbalanced
&bull; Input Sensitivity: 1.15 V ( 3.4 dBu) for rated power into 4 ohms
&bull; Gain: 32 dB
&bull; Maximum Input Level: 9.75 Vrms ( 22 dBu) &bull; Turn On Delay: 2.5 seconds
&bull; Subsonic Filter: 9 dB @ 30 Hz
&bull; Topology: Class AB
&bull; Cooling: > 90 dB @ 1 kHz
&bull; Channel Separation: Dual variable-speed fans with back to front airflow Indicators
&bull; Channels A and B
SIG (Signal Present), OL (Overload)
POWER
&bull; Current Consumption:
Idle: 0.5 A 1.0 A
Musical Program @ 8&frac12; 5.1 A
Musical Program @ 4&frac12; 6.7 A
Musical Program @ 2&frac12; 10.6 A

Collection only from Milton Keynes
£60 firm . . . . Need this gone!

Edited June 16, 2015 by King Tut

[King Tut]

Bump

[King Tut]

Up

[King Tut]

Bumpy for price drop

Edited May 2, 2015 by King Tut

[King Tut]

Bump

[King Tut]

Bump

[King Tut]

Bump

[King Tut]

Bump