Feel a bit silly (Boss LS-2 related)

[horrorshowbass]

Hi guys,
so i bought an LS2 to blend my clean/effects tone but could never set up my board with it without leads all over the show(like a big bowl of cable spaghetti:))
I ended up selling it on and now regret it as ive got a bass big muff that could do with clean blend. Can i run the pedal in series, do ALL the ls2 inputs and outputs have to be used i.e. Can i go muff output----ls2----amp?
sorry can't be clearer about this, any help greatly appreciated
cheers
Mick

[fretmeister]

Nope. Once the signal hits the muff you can't add clean to it!

Bass - LS2 - Muff in a loop - Out from LS2 to amp


But IIRC (been a while since I used one) the LS2 automatically shorts the unused loop.

So stick your muff in 1 loop and then you don't need to connect the other loop to itself for the clean signal. Just make sure the LS2 is set to A and B loop on at the same time.

That will cut your cables down by 1 anyway!

[horrorshowbass]

Cheers man, time to start experimenting:)

[lefrash]

yep this works. No need to run a cable to 'complete' the clean loop.

[phagor]

Another option is to upgrade the Bass Big Muff to a deluxe that has a blend knob (and a crossover)...