DSGW1 Posted September 30, 2014 Share Posted September 30, 2014 (edited) I played a pub gig the other day - not a huge space, but the noise I produced with my Gretsch Broadkaster through an Ashdown Superfly with an ashdown 15" cab was almost non existent. I spent most of the gig fiddling with the dials and then ended up grabbing my mate's unnamed active during the break, which made it marginally better. Could it be the phase and a conflict between PA and Amp? We had piano and two acoustics (played like electrics) through the PA. I used the same set up at rehearsal the other day, but with a hartke 4X10 transporter cab and it was OK. Edited September 30, 2014 by DSGW1 Quote Link to comment Share on other sites More sharing options...
Bill Fitzmaurice Posted September 30, 2014 Share Posted September 30, 2014 The Fly isn't a powerhouse, so it needs a high sensitivity cab. I don't have issues with mine, but only because my cab has very high sensitivity. Most 4x10s have higher sensitivity than most 1x15s, so that's probably the difference you heard. Quote Link to comment Share on other sites More sharing options...
Chienmortbb Posted September 30, 2014 Share Posted September 30, 2014 (edited) There was s thread on TB I think for a mod to get a bit more gain from the preamp on the Superfly. I will look for it and get back to you. OK I have found it but there is no circuit diagram/schematic. http://vissinger.org/pages/SuperFlyMods.html I will do some more checking,back soon! Edited September 30, 2014 by Chienmortbb Quote Link to comment Share on other sites More sharing options...
Phil Starr Posted October 1, 2014 Share Posted October 1, 2014 There are two variables here, the cab and the venue. The acoustics in some venues are appalling. Low frequencies are hard enough to hear clearly at the best of times but if you are shoved into a highly reverberant space with a not very lively speaker which is pointed at your legs not your ears then you won't hear anything, even though it may be fine for the audience. Quote Link to comment Share on other sites More sharing options...
Chienmortbb Posted October 1, 2014 Share Posted October 1, 2014 OK the Superfly spec is officially 2 x 250W into 8 ohms. However the chips used in the Superfly are actually not good for 250W. They are bridged TDA 8927s and thet are good for about 180 watts each into 8 ohms. Ironically they don't give much more than 110W into 4 ohms so best keep the cabs to 8 ohms. I will look at the rest of the circuit later to see where you might get some gain back. Quote Link to comment Share on other sites More sharing options...
tauzero Posted October 1, 2014 Share Posted October 1, 2014 I thought it was 2x250 into 4 ohms, 2x175 into 8 ohms. And, indeed, doing a quick google, Ashdown's website agrees with me (and it was them that told me it was 2x175 into 8 ohms). There is a Superduperfly, the 1000W version, which has an internal fan and runs nice and cool. Quote Link to comment Share on other sites More sharing options...
grenadilla Posted October 2, 2014 Share Posted October 2, 2014 (edited) The Superfly is not real powerful. I got one and it sounded good in my living room . The presets were many good tones and the compressor gave interesting sounds. I got another 'Fly when they closed out . With a band it did not put out any more sound than a MAG 300. Get two cabinets to use both output sections. Good Luck. The new Rootmaster is better. Edited October 9, 2014 by grenadilla Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.