Wonky2 Posted October 11, 2014 Share Posted October 11, 2014 (edited) Thought I'd go nuts and treat myself Just picked this up tonight from a fellow bc'er (cheers andy) [URL=http://s296.photobucket.com/user/myzeneye/media/imagejpg1-13.jpg.html][IMG]http://i296.photobucket.com/albums/mm189/myzeneye/imagejpg1-13.jpg[/IMG][/URL] 4ohm combo and 4 ohm cab, this thing is rattling the fillings out my head!!! The sound is just superb. Looking forward to having a fiddle during non asbo enticing hours. Mrs wonky is in for a shock when she walks in to the living room tomorrow morning and see's the new addition Might need some tips with the parametric is any one is familiar....? Edited October 11, 2014 by Wonky2 Quote Link to comment Share on other sites More sharing options...
discreet Posted October 11, 2014 Share Posted October 11, 2014 (edited) You mean Mrs Wonky doesn't know about it yet?? Ha! Edited October 11, 2014 by discreet Quote Link to comment Share on other sites More sharing options...
Wonky2 Posted October 11, 2014 Author Share Posted October 11, 2014 Nope hee hee hee Quote Link to comment Share on other sites More sharing options...
Bassman Steve Posted October 11, 2014 Share Posted October 11, 2014 Don't want to be a killjoy but note Boogie's advice to restrict using it at 2 ohms (with the extension cab) too much. The manual says it'll fry the mos-fets. Bet it does sound amazing though. Quote Link to comment Share on other sites More sharing options...
andyonbass Posted October 11, 2014 Share Posted October 11, 2014 [quote name='Wonky2' timestamp='1412986857' post='2573982'] Might need some tips with the parametric is any one is familiar....? [/quote] [url="http://www.mesaboogie.com/manuals/WalkAbout.pdf"]Page 10 of the manual[/url] is a good place to start........... Quote Link to comment Share on other sites More sharing options...
funky8884 Posted October 11, 2014 Share Posted October 11, 2014 I had a 15" 4ohm combo and needed to roll off the low frequencies as they played havoc on hollow stages , used to tilt the cab up a bit to try and decouple the passive driver. Quote Link to comment Share on other sites More sharing options...
Leslie77s Posted October 11, 2014 Share Posted October 11, 2014 I was going to mention the ohms, apparently if buying new you can request that they change the combo speaker to 8 ohms to allow the cab extension. I really fancy buying one now they look top notch! Well done on getting it past the Mrs a man after my own heart! Quote Link to comment Share on other sites More sharing options...
funky8884 Posted October 11, 2014 Share Posted October 11, 2014 There is plenty of guys using the walkabout at 2ohm on talkbass , I was also emailed from a guy who's friend works for mesa and the walkabout was tested at 2ohm with no issues ( as stated in the email ) . Quote Link to comment Share on other sites More sharing options...
wateroftyne Posted October 11, 2014 Share Posted October 11, 2014 I ran mine at 2ohm for ages with no problems. A MESA tech actually popped up on TB a while back to confirm it'll be fine. Also, if you have a hunt around on TB there's a thread which gives a pretty detailed explanation of the EQ. It's a bit whacky. Quote Link to comment Share on other sites More sharing options...
EssentialTension Posted October 11, 2014 Share Posted October 11, 2014 The EQ does take a bit of getting used to but as the whole thing sounds great anyway it hardly matters. Quote Link to comment Share on other sites More sharing options...
Wonky2 Posted October 11, 2014 Author Share Posted October 11, 2014 Just down loaded the manual from mesa site...... Next question..... What about castors ? Yes I know there is the radiator underneath and the uppermost car should be taken blah blah blah Anyone done it? Is radiator hugely affected Quote Link to comment Share on other sites More sharing options...
RAY AGAINST THE MACHINE Posted October 11, 2014 Share Posted October 11, 2014 Nearly got this setup while I was still gigging. Hard to get hold of , and times were hard at the time. Looks (and probably sounds ) awesome Quote Link to comment Share on other sites More sharing options...
funky8884 Posted October 11, 2014 Share Posted October 11, 2014 Why would you need casters ? Quote Link to comment Share on other sites More sharing options...
EssentialTension Posted October 11, 2014 Share Posted October 11, 2014 [quote name='Wonky2' timestamp='1413019851' post='2574174'] What about castors ? [/quote] [url="http://mesa.stores.yahoo.net/cst-quickdetach.html"]http://mesa.stores.yahoo.net/cst-quickdetach.html[/url] Quote Link to comment Share on other sites More sharing options...
Wonky2 Posted October 11, 2014 Author Share Posted October 11, 2014 [quote name='funky8884' timestamp='1413027599' post='2574273'] Why would you need casters ? [/quote] I have a rather nasty auto immune disease which results in a type of inflammatory arthritis called ankylosing spondylitis..... Sometimes walking is hard never mind lugging this little brute Suffer a fair bit with it , hands have to go it hot water a lot to loosen them up, but I refuse to stop playing Quote Link to comment Share on other sites More sharing options...
Wonky2 Posted October 11, 2014 Author Share Posted October 11, 2014 [quote name='EssentialTension' timestamp='1413027855' post='2574280'] [url="http://mesa.stores.yahoo.net/cst-quickdetach.html"]http://mesa.stores.yahoo.net/cst-quickdetach.html[/url] [/quote] That looks great, and I had considered something very similar which Costco have on sale for around £15!! Very well built and folds up nice. I have used amps with castors before and when they are nice heavy footed ones they are great for moving things around. I like the trolley but don't think it bout tough out crossing car parks and such too well ? (Maybe wrong on that ) I've looked at castors on eBay, don't mind paying a bit for something quality, but I'm stuck on which fixing type to go with..... There are two types, one with a floor plate and four screw holes, the other with a stud. I don't fancy having four screw holes on each corner and would prefer one neat hole with a large flat washer and a lock nut..... Just means taking speaker out to access inside and fasten lock nuts down....... Seems like surgery for something simple ? Also, the back bottom part has a recess and the back casters would have to either move inwards, potentially making the footprint offset and unstable , or have them set in the corners but the back lock nuts and stud being visible from the back ? Has any one else fitted actors to their walkabout , what type did you use? But yes, the truck seems the easy solution.... Quote Link to comment Share on other sites More sharing options...
funky8884 Posted October 11, 2014 Share Posted October 11, 2014 Sorry to hear about your inflammatory arthritis and I hope you can continue playing. I would expect you would loose some coupling as you raise the passive radiator off the floor but the walkabout head has oodles off bass so it can easily added if you need it. Another option could be to offload the cabs and purchase a pair of TKS 112's as they are very light. Quote Link to comment Share on other sites More sharing options...
keeponehandloose Posted October 11, 2014 Share Posted October 11, 2014 I have the number of a good glazier and roofer when the windows and slates come loose. Glad your happy with the rig, I can almost hear it from here! Quote Link to comment Share on other sites More sharing options...
wateroftyne Posted October 11, 2014 Share Posted October 11, 2014 [quote name='funky8884' timestamp='1413027599' post='2574273'] Why would you need casters ? [/quote] IME. carrying the Walkabout Scout by the handle is a PITA. Quote Link to comment Share on other sites More sharing options...
funky8884 Posted October 11, 2014 Share Posted October 11, 2014 I used to use the handle on mine for short distances or for positioning , and longer distances I would cradle it like a baby , never was keen on all the bumps that trolleys or casters can transmit to amps. Quote Link to comment Share on other sites More sharing options...
Wonky2 Posted October 11, 2014 Author Share Posted October 11, 2014 [quote name='funky8884' timestamp='1413031851' post='2574342'] I used to use the handle on mine for short distances or for positioning , and longer distances I would cradle it like a baby , never was keen on all the bumps that trolleys or casters can transmit to amps. [/quote] Agreed, that's why the castors I'm looking At are heavy duty rubber jobs, i figured that the large the footprint of the rubber on the ground the more like the original foot it will be.... ??! Quote Link to comment Share on other sites More sharing options...
Wonky2 Posted October 11, 2014 Author Share Posted October 11, 2014 [quote name='keeponehandloose' timestamp='1413029301' post='2574312'] I have the number of a good glazier and roofer when the windows and slates come loose. Glad your happy with the rig, I can almost hear it from here! [/quote] Hahah bet your neighbours are pleased to see someone driving off into the distance with them....... great to meet you last night andy. For anyone out there doing any future deals with andy (keeponehandloose) great guy, pleasure doing business.... Quote Link to comment Share on other sites More sharing options...
Wonky2 Posted October 11, 2014 Author Share Posted October 11, 2014 On second thoughts, re the casters.... I think the trolly will be the best option. Casters will prevent stacking.... Anyone know where I can get one at a reasonable price? The fold up one from Costco is cheap but looks strong, however, the mesa one looks nice and small, purpose made obviously Quote Link to comment Share on other sites More sharing options...
funky8884 Posted October 12, 2014 Share Posted October 12, 2014 A guitarist I know has one of these or similar http://www.maplin.co.uk/p/70kg-folding-trolley-n48jq The larger circumference and softish wheels reduce shocks to the load. Quote Link to comment Share on other sites More sharing options...
Toasted Posted October 12, 2014 Share Posted October 12, 2014 I had that exact rig. It was one of my favourites. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.