DI Question

[Guest gazzatriumph]

[color=#282828][font=helvetica, arial, sans-serif]Hi, I have an Ashdown ABM 575 head, please see following instuctions,[/font][/color]

[color=#282828][font=helvetica, arial, sans-serif]A balanced D.I. is provided on a latching XLR socket. This has a push button placed below it that allows the user to choose either a Pre E.Q. signal [/font][/color]
[color=#282828][font=helvetica, arial, sans-serif](button pushed IN) or a Post E.Q. Post Sub and effects signal (button OUT).[/font][/color]
[color=#282828][font=helvetica, arial, sans-serif]The output signal from this XLR socket is set to a level and impedance suitable for connecting directly into the Microphone input of a mixing desk .[/font][/color]

[color=#282828][font=helvetica, arial, sans-serif]So when button is pushed in will my EQ settings sound go through PA or should it be out.[/font][/color]

[color=#282828][font=helvetica, arial, sans-serif]Thanks for any help [/font][/color]

[Dad3353]

[quote name='gazzatriumph' timestamp='1413133458' post='2575174']...
[color=#282828][font=helvetica, arial, sans-serif]Thanks for any help [/font][/color]
[/quote]

If you want the Eq settings to affect the PA sound, the button should be 'out' ('Post' means 'after the Eq'...)
If you don't want your Eq settings to affect the PA sound, the button should be 'in' ('Pre' means 'before the Eq'...)
Hope this helps.

[Guest gazzatriumph]

Thanks Dad3353 I thought that was the case but wanted to check, thanks again

[Dad3353]

[quote name='gazzatriumph' timestamp='1413135176' post='2575190']
Thanks Dad3353 I thought that was the case but wanted to check, thanks again
[/quote]
[sharedmedia=core:attachments:167485]
(... but next time, post only once, please. It'll get moved to a better section if it's not in the right place. Just sayin'... [size=4] [/size][size=4])[/size]