Jus Lukin Posted October 21, 2014 Share Posted October 21, 2014 (edited) - Edited February 22, 2022 by Jus Lukin Quote Link to comment Share on other sites More sharing options...
Dad3353 Posted October 21, 2014 Share Posted October 21, 2014 (edited) Maybe what you're after is an OLP MM5 Baritone guitar..? Can be tuned as a baritone, or down a full octave for use as a bass. Not very expensive (I bought mine several years ago for under £200...). Excellent in both roles, 30" scale length, sounds like a grand piano being hammered, and so useful for NIN-type bass lines. I believe there's a Danelectro model in a similar vein. Any good..? [attachment=174395:OLP_MM5_Bari.jpg] Edited October 21, 2014 by Dad3353 Quote Link to comment Share on other sites More sharing options...
BigRedX Posted October 21, 2014 Share Posted October 21, 2014 I doubt any standard guitar strings are available in heavy enough gauges. However have a look at the strings that Fernandes use for their PIEZO bass guitars that only 25.5" scale length. That should get you suitable E-G strings and then use guitar strings for the B and E. You'll need to get the nut re-cut and maybe also the bridge saddles for the increase string thicknesses. Quote Link to comment Share on other sites More sharing options...
Bradwell Posted October 21, 2014 Share Posted October 21, 2014 I use Ernie Ball 'not even slinky' strings to tune two whole tones down on one of my six strings (C F Bb Eb G C). Major third below standard and they're nicely playable at that tension on a 25.5 inch scale neck. A baritone six is usually either a perfect fifth, perfect fourth or major third below standard. You can buy replacement baritone necks to fit standard Fender guitars from Warmoth USA but for the price picking up a cheap baritone is a better bet for experimenting. Quote Link to comment Share on other sites More sharing options...
iiipopes Posted October 21, 2014 Share Posted October 21, 2014 A company called Circle K strings makes all gauges, and has sets for such applications. They are listed under "Bass VI" sets, and go to 18's which would have really light tension at a standard 25 1/2 inch scale, and "normal light" tension at baritone 28 1/2 or so scale. http://www.circlekstrings.com Quote Link to comment Share on other sites More sharing options...
EssentialTension Posted October 21, 2014 Share Posted October 21, 2014 Why not just buy a used Squier Bass VI for about £200? Quote Link to comment Share on other sites More sharing options...
Jus Lukin Posted October 21, 2014 Author Share Posted October 21, 2014 (edited) - Edited February 22, 2022 by Jus Lukin Quote Link to comment Share on other sites More sharing options...
uncle psychosis Posted October 23, 2014 Share Posted October 23, 2014 (edited) You can make a B-B baritone easily using a standard guitar and fairly standard strings. If you think about it, the highest five strings of a B-B set are the same as the lowest five strings of an E-E set (pedantry: one of the strings is out by a semitone). So just take a standard set of guitar strings and move them all one position, so put the low E where the A string normally goes, A string where the D normally is, etc. Find a suitable single string for the low B (I think D'addario and Ernie Ball both do very heavy singles, you probably want something like 0.60---or buy a single bass G string of suitable size) and Bob's your mother's brother. You may need a new nut to do this but finding the strings should be straightforward. Guys on another forum I frequent have done this and claim it works great. Its not quite the same as a proper longscale baritone but it would probably work for what you want to do. Edited October 23, 2014 by uncle psychosis Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.