Jump to content
Why become a member? ×

Repairs to a Warwick "Oiled" body - help please


Grangur
 Share

Recommended Posts

Hi there,
I've recently bought a [url="http://basschat.co.uk/topic/247269-warwick-corvette-std-ash-price-drop-350l-sold/page__fromsearch__1"]Warwick Corvette[/url] from Ordep of this parish. I love the bass. It sounds great etc, etc,.

The body is in need of some love. So I looked it up on Warwick.de and they describe the bass I have as:

produced: 2004-11-03

Description:
Corvette Standard, 4-string
Ocean Blue Oil finish
Swamp Ash body
Ovangkol neck
Black hardware

I already have a Streamer in flamed maple in oil finish and I'm happy about how to fix that up, but looking at the dings in the Corvette, I recon someone has lacquered the body of this. It doesn't look like plain oil to me.

What I'd like to know is; is this normal for Warwick's "Ocean Blue Oil finish" ?
What would anyone here recommend to do to fix this up?





I appreciate the other option is to leave it and accept it as "character" and a roadworn look; which isn't totally out of the question.

Thanks in advance.

Rich

Link to comment
Share on other sites

It certainly does look Lacquer-like.
The word "oil" can actually mean things in terms of guitar finishing. Even if you are more specific and say "Danish oil" it can mean many different things. Many oils are in fact a mix of oils and varnish, so over time basically will become a varnished finish. I suspect this is the case with your bass.
Not quite sure the best way to repair it. One option is to sand the body down enough to take off the "varnish" but leave the stain, and then do a Danish oil (Colron) and Wax (Briwax) finish over the top. THis type of finish is a complete piece of cake, takes only 2-3 days and looks awesome. The only risk as I see it is that you might end up taking off more of the stain whilst sanding than you had hoped for.
All I can say is that the one stained Warwick body that I have refinished, the stain went really deep.
If you did take off more colour than you wanted you could always re-stain with some blue, which would not be that difficult.
A lot of this depends on how experienced and confident you would be doing these things.

Have to say I love the Warwick trans blue finishes !!

Link to comment
Share on other sites

Many thanks. Good point about the oil/varnish thing. I'd not thought about it but it could be like a "tru-oil" type thing.

You've a good point about sanding. If it does remove a lot of the blue, then if the blue stays in the grain and I only remove blue from the top of the wood, that too could look good. It would also make it a bit unique.

Last night I also discovered it also needs a new just-a-nut. So this will be getting a new brass one. So, it's looking like this one's going to get some "love" at last.

Link to comment
Share on other sites

hi i have a oiled corvette too , and yes it does look like someone has put a lacquer on it . looks like it reacted with the oil hence the peeling . i would try and remove the lacquer as it would only be surface depth ,and re oil it .
i use the warwick wax on mine to keep the finish good .

Link to comment
Share on other sites

Many thanks guys. I guess it looks like the lacquer is one that was applied at the factory. It's just unfortunate that someone in it's history didn't take enough care of this particular one. On the back is has some writing in Chinese, so all in all it's got "character".

Throwoff; thanks, but unless the lacquer of off completely I wouldn't use oil on a lacquered bass; it may not harm it, but it would make a bit of a mess, to say the least. I think I'll start off by stripping the body down and sanding down the areas with loose lacquer, and see what happens. I may end up with a Corvette in "roadworn" style.

Whatever happens I'm sure it'll still sound great when it's finished.

Link to comment
Share on other sites

so the coloured ones are different to mine then , mine came with the warwick folder containing handbook ,tools and warwick wax polish plus duster with instructions to wax every few weeks over the oiled finish .
yours should look ok as a roadworn model .

Edited by jerseytrev
Link to comment
Share on other sites

Yes, I've also got a natural streamer and a Tobacco oiled one. Both are actually oiled.
"Blue oil" it seems, isn't oil at all. The blue colour is stain with lacquer over the top. Tonight I scrapped the dings and removed the loose lacquer, then sanded it. I then applied soft wax furniture polish. It looks good. I'll post pics tomorrow.

Link to comment
Share on other sites

[quote name='Grangur' timestamp='1414400715' post='2588828']
Last night I also discovered it also needs a new just-a-nut. So this will be getting a new brass one. So, it's looking like this one's going to get some "love" at last.
[/quote]

Thomann do a Just-a-nut 1 clone - [url="http://www.thomann.de/gb/abm_6240_webster_nut_bass.htm"]http://www.thomann.de/gb/abm_6240_webster_nut_bass.htm[/url] although you'd have to check the width.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...