Bass Bins

[gadgie]

Hello BC
I've got a pair of Peavey Bass Bins. I'm pretty sure they have a build in cross over which is switchable (but I'm not sure).
These are quite old Hysis models. Do I simply run a cable from my PA amp into them, then up the the tops?
Cheers

[taunton-hobbit]

Go to the Peavey website (Google Peavey hysis)) the Hysis manuals are on there in PDF.

[deepbass5]

The hysis do have crossovers - just need to double check these are working OK access via speakon back plate I did cook mine once - and managed to order new and changed easily - just a small board on vehical type spade connectors between speakon and speaker
you will need the correct speakon cables note if you have peavey tops say hysis 1 then you need to mark up the connecting leads as the out connector will be 2+ 2- and the in will be 1+ 1- I made my leads up so marked the top hi speaker connector so i could get it right first go on dark stages. If you get stuck Pm me as i think i have the old info, but would think you can find out on the Peavey site.
So thats from Amp to left socket of sub 1+ 1- then right socket of sub out connector 2+ 2- to Hi top in connector 1+ 1-

[gadgie]

Thanks guys. Good info