bassman84 Posted November 5, 2014 Share Posted November 5, 2014 Hey guys, is it ok to plug 2 basses in an amp with passive and active inputs but only one channel? Cheers Quote Link to comment Share on other sites More sharing options...
Kiwi Posted November 5, 2014 Share Posted November 5, 2014 Depends on the design of the amp and whether you are intending to thrash the proverbial out of it. Quote Link to comment Share on other sites More sharing options...
HowieBass Posted November 5, 2014 Share Posted November 5, 2014 Could be tricky setting the input gain too. Quote Link to comment Share on other sites More sharing options...
Matt P Posted November 6, 2014 Share Posted November 6, 2014 are you wanting to run both basses at the same time or are you going to be swapping from one bass to the other? if the amp has seperate level controls for each input then running 2 basses at once should be fine, if there is just a single input level then you are likely to hit problems. if you want to switch between 2 basses then get an A/B switching pedal, they're fairly cheap and some of them have seperate volume contols for each instrument so that you don't get huge differences in the volumes when you switch. Matt Quote Link to comment Share on other sites More sharing options...
bassman84 Posted November 6, 2014 Author Share Posted November 6, 2014 Thanks Matt Quote Link to comment Share on other sites More sharing options...
stingrayPete1977 Posted November 6, 2014 Share Posted November 6, 2014 I use a cheap Behringer AB100 pedal, does just what you want, I use it to keep my upright and an electric bass connected, hit the pedal to swap instruments and it has a level knob for each input Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.