mikebass84 Posted November 24, 2014 Posted November 24, 2014 I've decided to attempt to make a blend pedal so I can add some clean signal to mix in with my Fuzz. Now I think I know what I'm doing but I would like some input before I start spending money. I have found this pre built circuit (http://shop.pedalparts.co.uk/Blender_signal_mixer/p847124_8681943.aspx) and I can get any extra bits and the enclosure online. Now on the schematic that site shows would I connect one input to "input" and the other to "rcv" and then connect the "output" and "snd" to the output jack? Sorry if that makes no sense to anyone and thanks if it does Quote
BigGuyAtTheBack Posted December 7, 2014 Posted December 7, 2014 Hi Mikebass84, its simple when you know how. The signal from your bass goes to the Input, the output signal goes to your amp. The fuzz pedal input is connected to 'snd' and the output from the fuzz pedal goes to 'rcv'. Blend to taste. I have just built a wee blender circuit very similar to that one in the link. It works well, just have to built the enclosure for it now. Hope this helps. Quote
mikebass84 Posted December 8, 2014 Author Posted December 8, 2014 Awesome. That does help. I think I'll make it a new year project. My girlfriend works in a metal factory so I might buy a pre made enclosure and get her to drill it out Quote
dannybuoy Posted December 9, 2014 Posted December 9, 2014 That particular circuit looks very handy for retrofitting inside of another pedal! Quote
mikebass84 Posted December 9, 2014 Author Posted December 9, 2014 I think it's designed for that but I don't want to start messing with my swollen pickle (that sounds wrong) Quote
mikebass84 Posted January 27, 2015 Author Posted January 27, 2015 Payday Friday and I have a bit of free time so I think I'm gonna try and make this. It just seems to easy. Am I missing something? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.