Oggy Posted December 2, 2014 Share Posted December 2, 2014 Hi Basschaters I've just bought a Mark Bass Jeff Berlin Combo, 'slap it hard' is now the new owner of my Genz Benz and Barefaced cab - he brought along his oversized violin to try it out - the misses is still glaring at me and complaining that her teeth are now loose . Anyway I didn't get a proper user manual with it, aparently "it will be with me shortly". I have downloaded the 'Owners Manual' from the Mark Bass web site, but to be quite honest - it's about as good as a Chocolate Teapot. The manual gives a numbered picture view of the front and rear of the amp section i.e. 1. Unbalanced 1/4" jack input 2. Balanced XLR input etc Most of the knobs and inputs / outputs are self explanatory and nothing I've not seen before but - it has two knobs that I'm not familiar with. Can someone give me the lowdown on what VLE and VPF do? The manual tells me that the VLE is a Filter Level Control Knob, it also tells me that the VPF is a Filter Level Control Knob . Any of you chaps out there know what those knobs really do? I have to say that even not knowing what those knobs do didn't stopped me using the amp at rehearsals last Thursday - it's awesome - the exclusion of a tweeter / horn and the range of the equalisation knobs is great - this combo has more bottom end than I could ever get out of the Benz with the Barefaced - loving it. Oggy Quote Link to comment Share on other sites More sharing options...
Musky Posted December 2, 2014 Share Posted December 2, 2014 VLE is a treble cut - turning it up cuts a greater range of the treble frequencies. VPF is a mid cut - it might boost the bass and treble as well. Quote Link to comment Share on other sites More sharing options...
deepbass5 Posted December 2, 2014 Share Posted December 2, 2014 One is a mid scoop arround 300 Hz but lifts bass and treble either side progresively as you go higher. keep the four main knobs at 12 and just use this to get an idea what it can do. the other is for high cut shelving so you can get a vintage on flats sound Quote Link to comment Share on other sites More sharing options...
Roland Rock Posted December 2, 2014 Share Posted December 2, 2014 From the Markbass website: What do the VLE and VPF filters do? The VLE and VPF are useful EQ filters that help you adapt your sound for different styles of music. The VLE (Vintage Loudspeaker Emulator) is a shelf EQ that cuts a wider and wider range of high frequencies as you turn it up. Markbass amps are very clear-sounding, and this filter has the effect of drawing you into the mix more, making your sound less present. It's kind of like an "old school" knob! The VPF (Variable Preshape Filter) boosts lows and highs, and cuts mids. Some call this kind of effect a scoop, a smiley-shape EQ, or an enhance knob. It's very effective for slap bass, pick playing, and driving eighth-note rock. These two filters can be combined for interesting effects. But remember that they are off when they are all the way counterclockwise--we suggest you start in that position and turn the filters up gradually, one at a time, to hear and understand what they do. Quote Link to comment Share on other sites More sharing options...
molan Posted December 2, 2014 Share Posted December 2, 2014 They're not mutually exclusive either - try experimenting with both at the same time Quote Link to comment Share on other sites More sharing options...
Oggy Posted December 2, 2014 Author Share Posted December 2, 2014 [quote name='Roland Rock' timestamp='1417554309' post='2621740'] From the Markbass website: What do the VLE and VPF filters do? The VLE and VPF are useful EQ filters that help you adapt your sound for different styles of music. The VLE (Vintage Loudspeaker Emulator) is a shelf EQ that cuts a wider and wider range of high frequencies as you turn it up. Markbass amps are very clear-sounding, and this filter has the effect of drawing you into the mix more, making your sound less present. It's kind of like an "old school" knob! The VPF (Variable Preshape Filter) boosts lows and highs, and cuts mids. Some call this kind of effect a scoop, a smiley-shape EQ, or an enhance knob. It's very effective for slap bass, pick playing, and driving eighth-note rock. These two filters can be combined for interesting effects. But remember that they are off when they are all the way counterclockwise--we suggest you start in that position and turn the filters up gradually, one at a time, to hear and understand what they do. [/quote] Thank you Guys, appreciated. From what Roland Rock sent me from the Mark Bass web site; I can see the VLE knob getting some use "Old School" - that's me. I never did get the hang of playing with a pick or slapping / popping. Thanks again Chaps, I had a feeling I'd get some sense here. Ciao Oggy Quote Link to comment Share on other sites More sharing options...
discreet Posted December 2, 2014 Share Posted December 2, 2014 [quote name='Oggy' timestamp='1417555166' post='2621756'] I had a feeling I'd get some sense here. [/quote] Well that's a first. Arf, arf! Quote Link to comment Share on other sites More sharing options...
xgsjx Posted December 2, 2014 Share Posted December 2, 2014 Depending on which band, I did find the VLE useful for getting a good blues bass sound & using the VLE & VPF together got some good sounds in my electronica band. They're actually quite useful & don't just replicate turning the treble down (VLE) or turning the treble & bass up (VPF). I think they work on different frequency bands from the EQ section on the amp. Quote Link to comment Share on other sites More sharing options...
discreet Posted December 2, 2014 Share Posted December 2, 2014 [quote name='xgsjx' timestamp='1417560669' post='2621864'] They're actually quite useful & don't just replicate turning the treble down (VLE) or turning the treble & bass up (VPF). I think they work on different frequency bands from the EQ section on the amp. [/quote] I believe that to be the case... I had a Markbass Super Booster pedal at one time, basically has these two filters and a clean boost. Very useful for warming up any dull amp, and a lot cheaper than buying a Markbass amp. Quote Link to comment Share on other sites More sharing options...
chris_b Posted December 3, 2014 Share Posted December 3, 2014 I turned these filters off when I had my LM2. I didn't find a use for them at all. Quote Link to comment Share on other sites More sharing options...
discreet Posted December 3, 2014 Share Posted December 3, 2014 [quote name='chris_b' timestamp='1417567053' post='2621940'] I turned these filters off when I had my LM2. I didn't find a use for them at all. [/quote] It's true you do have to use them quite sparingly live, or you risk becoming scooped and inaudible... Quote Link to comment Share on other sites More sharing options...
JTUK Posted December 3, 2014 Share Posted December 3, 2014 Just have a play with them.... they are the usual custom mappings that a lot of makers now use; a bit like 'timbre', enhance', 'aural' which featured on amps like the Thunderfunk and previously Eden and SWR. They are varible presets...or maps. Quote Link to comment Share on other sites More sharing options...
chrismuzz Posted December 3, 2014 Share Posted December 3, 2014 I used to use these with the Markbass F1, both around 9 o clock.. but now that I'm using the LMT800 I'm finding I love the sound with the EQ completely flat and filters off. Maybe a tiny bass cut depending on the room acoustics Quote Link to comment Share on other sites More sharing options...
fretmeister Posted December 3, 2014 Share Posted December 3, 2014 When I had one I set the EQ all at 12 o clock and just used the filters to adjust for the room. It was very nice. Sometimes I wonder why I sold it! Quote Link to comment Share on other sites More sharing options...
scalpy Posted December 3, 2014 Share Posted December 3, 2014 I use the vpf filter all the time, the posh control as I call it. I've got my eq the same pretty much all the time and then dial back the the vpf to as little as I can get away with. Works for me although the graph readers might tell us all why it's wrong... Quote Link to comment Share on other sites More sharing options...
Al Krow Posted February 26, 2017 Share Posted February 26, 2017 I just came across this (!) which has saved me duplicating the Q from a couple of year's back. +1 for Scalpy's comment: the VPF mid scoop provides a nice EQ enhancement - whereas I find the treble cut on the VLE results in a muffled sound and less ability to cut through the mix (I guess the flip side is RR's nicely put point of drawing you (or possibly even losing you?) in the mix. Quote Link to comment Share on other sites More sharing options...
Davebassics Posted March 2, 2017 Share Posted March 2, 2017 I use the VLE in almost every situation I come across. I have it sat at 10 o'clock permanently and adjust from there. I find it tames the transparency a little bit, bringing the top end out seems to bring little character out of the amp in a way that a LPF/traditional shelf doesn't. Having said that here are the EQ plots ........ [url="https://drive.google.com/file/d/0B7IkdfXXJWFiTlR6MElrWWRLbTA/view?usp=sharing"]https://drive.google.com/file/d/0B7IkdfXXJWFiTlR6MElrWWRLbTA/view?usp=sharing[/url] So as you can see, it is just a shelf. I think by attenuating the highs, the tone is more focused on the lower mids of my jazz bass which I percieve as "character". Regardless of what it does, I love it![code] Quote Link to comment Share on other sites More sharing options...
la bam Posted March 4, 2017 Share Posted March 4, 2017 If I remember correctly, the 'off' position for these isn't obvious. Have a look at the manual to see where is off and where the dials start to take effect. Quote Link to comment Share on other sites More sharing options...
Trueno Posted March 4, 2017 Share Posted March 4, 2017 Never use them on mine. Set everything flat and get a killer sound via my EBS pre-amp. I bought a Markbass as I needed a lightweight combo due to arthritis... more lightweight choices nowadays, but I have no regrets about the set up, other than it looks a bit silly perched between two Marshall half stacks. However, I recommend you have a good old twiddle and let your ears decide. On the positive side, they enable you to get a ball park tone very quickly (vintage or scooped). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.