V2factoryman Posted December 20, 2014 Share Posted December 20, 2014 Hi guys, just wondering if anyone has had any experience with this or can give me a pointer as to a solution. I run it with two Barefaced BB2s out of the two separate 500W outputs (not the 3rd one where you can bridge it to 1000W). It works fine for about an hour and a half then suddenly all signal out goes. Amp still illuminated etc. It doesn't always do it. I don't run it at any more than about 1 o'clock max on the master volume, and last night was at about 11 o'clock. It didn't feel hot. At first I thought it was the guitar leads and I changed them all to Rock Wire. Did a gig and all was fine, so I thought it was problem solved. Not the case apparently :-/ Hope someone can help, I've never read anything negative about these amps and I love the tone, I really want to get this sorted. Comments/ideas/suggestions welcome. Thanks folks. Quote Link to comment Share on other sites More sharing options...
LukeFRC Posted December 20, 2014 Share Posted December 20, 2014 talk to 2x18 -he had an issue with the switches on his. When it used to be mine I never had a problem. (BTW 2x BB2 - must be awesome!) Quote Link to comment Share on other sites More sharing options...
tauzero Posted December 22, 2014 Share Posted December 22, 2014 Have you tried contacting Tecamp direct? They've been very helpful when I've contacted them. Quote Link to comment Share on other sites More sharing options...
V2factoryman Posted December 30, 2014 Author Share Posted December 30, 2014 Sorry folks, been a bit out of circulation for a few days. Will contact 2 x 18 and Tecamp. Cheers A. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.