Kiwi Posted January 2, 2015 Share Posted January 2, 2015 [color=#282828][font=helvetica, arial, sans-serif]As part of the phase two of my clear out of stuff, I have two of these ABS plastic racks available in anticipation of selling the synth modules they've been housing. [/font][/color] [color=#282828][font=helvetica, arial, sans-serif]This one is in great condition and has been used only for home use (and to protect rack gear during shipping). This case has one of the wing nuts replaced with a normal nut and tightened into a permanently 'latched' position. The case lid is still secure, it just means the wing nut side goes on after the permanently fixed side. Parts are available for free from SKB and if you live in London I can recommend a very good reasonably priced luggage repairer off Baker Street. I've never needed to bother myself - the rack worked fine for home and occasional gig use.[/font][/color] [attachment=179913:DSC_0200 - Copy.JPG] [attachment=179914:DSC_0202 - Copy.JPG] [b]Specifications:[/b] [color=#282828][font=helvetica, arial, sans-serif][font=arial, helvetica, sans-serif][color=#333333]• Exterior depth: 21.50" (54.61 cm) [/color] [color=#333333]• Exterior width: 22" (55.88 cm) [/color] [color=#333333]• Exterior height: 9.5" (24.13 cm) [/color] [color=#333333]• Rack space units total: 4 [/color] [color=#333333]• Rack depth front rail to back lid: 15.94" (40.48 cm)[/color] [color=#333333]• Rack depth front lid to back lid 18.94" (48.10 cm) [/color] [color=#333333]• Lid depth: 2.50" (6.35 cm) [/color] [color=#333333]• Weight: 12.20 lbs. (5.53 kg).[/color][/font][/font][/color][color=#282828][font=helvetica, arial, sans-serif] [/font][/color] [color=#444444][font=helvetica, arial, sans-serif]Science bit:[/font][/color] [color=#282828][font=helvetica, arial, sans-serif]No trades...unless you happen to have a Yamaha PLG150-AN plug in board...no? I'd prefer the cash then.[/font][/color] [color=#282828][font=helvetica, arial, sans-serif]First person with the cash gets the item. A 10% non refundable deposit is welcome to remove the item from being advertised.[/font][/color] [color=#282828][font=helvetica, arial, sans-serif]Asking price excludes shipping but packing will be included so long as specialist packing material isn't required. Collection is preferred from Zone 3 (just inside the South Circular) SE London however. O[/font][/color][color=#282828][font=helvetica, arial, sans-serif]r I can meet somewhere within the eastern side of Central London during lunchtime during the week.[/font][/color][color=#282828][font=helvetica, arial, sans-serif] [/font][/color] Link to comment Share on other sites More sharing options...
Kiwi Posted February 6, 2015 Author Share Posted February 6, 2015 BUMP Link to comment Share on other sites More sharing options...
Kiwi Posted May 27, 2015 Author Share Posted May 27, 2015 zombie type lumpy bumpy Link to comment Share on other sites More sharing options...
Recommended Posts