Hartke cab for Kilo amp

[hellride]

I have a Hartke Kilo amp that I currently run through a Kustom DE610H. I'd really like to use Hartke cabs aswell but I don't know what to use, that can hold up to the amps power. I would prefer aluminium-cones but I can't afford HyDrive.

[Graham]

If you can find one, the discontinued Pro4200 was a superb cab. Weighed about the same as a small moon, but sounded great and not expensive.

I appreciate this may not be an awful lot of help though.

[Dood]

I've ran the following with my Kilo with superb results:

1 or 2 4.5XL cabinets (my favourite)
1 or 2 410XL cabinets
2 HX112 hydrive cabinets
2 HX410 cabinets
and even a 2.5XL cabinet

If you watch your volume you'd have no problem running a bridged Kilo in to a single 4.5XL - it sounds great. But boy are they heavy beasts together!

[hellride]

So a 4.5XL and a 410XL in stereo would work? Or perhaps tw0 4.5's and two 410's per side?

Edited January 9, 2015 by hellride

[Lozz196]

[quote name='hellride' timestamp='1420800538' post='2653490']
So a 4.5XL and a 410XL in stereo would work? Or perhaps tw0 4.5's and two 410's per side?
[/quote]

I reckon that would sound great, but I really hope you have roadies.

[Sparky Mark]

[quote name='hellride' timestamp='1420800538' post='2653490']
So a 4.5XL and a 410XL in stereo would work? Or perhaps tw0 4.5's and two 410's per side?

[/quote]

OMG!!!!!

[Dood]

You can indeed run two 8 ohm cabs off of each channel of the amp - 4 4.5XLs would I assure you sound earth shaking and despite the weight of them are cheap as chips second hand.assive bang for your buck and bullet proof!

[hellride]

Something like this :
[attachment=180876:DSC017051.jpg]