squire5 Posted August 9, 2008 Share Posted August 9, 2008 I want to install a series/parallel push pull pot (Geez what a mouthful!) on my Jazz bass.I've ordered the pot off Ebay but I've just noticed that the one I've ordered is 500K instead of 250.Will it make much of a difference or should I order the correct one now? Quote Link to comment Share on other sites More sharing options...
escholl Posted August 9, 2008 Share Posted August 9, 2008 no worries, you'll be fine with 500K. Quote Link to comment Share on other sites More sharing options...
squire5 Posted August 13, 2008 Author Share Posted August 13, 2008 (edited) Thanx Escholl but further to my query,I have installed the pot and now find the volume sweep is confined to the last 1/4 turn of the Volume control (neck pickup control).Also in series mode,the bridge pup control does not operate at all.In parallel mode everything is normal except for the aforementioned volume sweep problem.I may have got the modes mixed up as I'm not sure which is the default.Clear as mud?I followed the diagram from the Seymour Duncan website.Is the pot value critical.Pointers anyone?Ta! Edited August 13, 2008 by squire5 Quote Link to comment Share on other sites More sharing options...
thinman Posted August 13, 2008 Share Posted August 13, 2008 [quote name='squire5' post='261833' date='Aug 13 2008, 07:17 PM']Thanx Escholl but further to my query,I have installed the pot and now find the volume sweep is confined to the last 1/4 turn of the Volume control (neck pickup control).Also in series mode,the bridge pup control does not operate at all.In parallel mode everything is normal except for the aforementioned volume sweep problem.I may have got the modes mixed up as I'm not sure which is the default.Clear as mud?I followed the diagram from the Seymour Duncan website.Is the pot value critical.Pointers anyone?Ta![/quote] In series mode both pickups become one humbucker in effect so only volume control applies - the neck volume - the other is redundant. I believe that's how S1-type switching works - the bridge volume does nothing in series mode. I've just bought a MIA control plate with S1 switching from a chap on here that I'm about to fit to my Jazz so I'll confirm that when I've done but I expect there's loads of people here that can confirm it sooner. As regards the sweep it may be that you have a linear taper pot where really you need a log or audio taper type. Quote Link to comment Share on other sites More sharing options...
escholl Posted August 14, 2008 Share Posted August 14, 2008 (edited) [quote name='squire5' post='261833' date='Aug 13 2008, 07:17 PM']...and now find the volume sweep is confined to the last 1/4 turn of the Volume control (neck pickup control).[/quote] it's nothing to do with the 250K/500K thing. the only effect that will have is that you bass may have a slightly brighter tone, but nothing rolling off the tone control a tiny bit more can't fix. my bass actually does this thing with the volume as well, and i've been over and over the wiring of it and i'm not sure what it is. 500K audio taper pot, like yours, and i've made triple sure it's not hooked up backwards or anything....can't say i've figured it out. Edited August 14, 2008 by escholl Quote Link to comment Share on other sites More sharing options...
squire5 Posted August 14, 2008 Author Share Posted August 14, 2008 Looks like its perfectly OK Escholl.Thinman has put my mind at rest re the one volume control scenario,and also the pot type issue as well.I checked and it is a linear pot,so I've ordered an audio taper pot.Problem solved!Cheers guys. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.