geoffbyrne Posted January 29, 2015 Posted January 29, 2015 (edited) I have a couple of pairs of straplocks - Dunlop type - whose screws seem to have gone AWOL. Since these are the type of lock which have a hole in the middle for the strap-side to plug into, ordinary strap-peg screws are too big & block the hole. Does anyone know of a source of small-headed strap-lock screws? G. Edited January 29, 2015 by geoffbyrne Quote
MoonBassAlpha Posted January 30, 2015 Posted January 30, 2015 I've put the screw in a drill and held it against rough wet and dry paper until it's the right diameter to go down the hole. Quote
Andyjr1515 Posted January 31, 2015 Posted January 31, 2015 [quote name='MoonBassAlpha' timestamp='1422662226' post='2675516'] I've put the screw in a drill and held it against rough wet and dry paper until it's the right diameter to go down the hole. [/quote] Yup - I've done the same (but with a needle file). It's a right pain because the head size of the design is definitely not standard in these parts... Quote
Count Bassy Posted February 4, 2015 Posted February 4, 2015 [quote name='Andyjr1515' timestamp='1422691005' post='2675623'] Yup - I've done the same (but with a needle file). It's a right pain because the head size of the design is definitely not standard in these parts... [/quote] Angle Grinder here. Quote
.jpg.518c69c2d9e1581799f3c11301dc2da5.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.