Bassmurf Posted August 12, 2008 Share Posted August 12, 2008 Can anyone help? I've recently changed the strings on my Fender Geddy Lee from the 45-105 Fender strings to a set of 45-105 DRs' - the other strings are fine but it appears that when I play a powerchord high up (say for instance an F on the D string and a C on the Gstring) the note from the G seems to be out a little out. When I changed the strings I changed them one at the time which when I owned a Precision seemed to work ok! Any ideas? Cheers Dan Quote Link to comment Share on other sites More sharing options...
thedontcarebear Posted August 12, 2008 Share Posted August 12, 2008 Sounds like you are just saying the intonation is out? Quote Link to comment Share on other sites More sharing options...
danlea Posted August 13, 2008 Share Posted August 13, 2008 (edited) Like the uncaring ursine says, sounds as if you simply need to adjust the bridge. Test the intonation of the 12th fret harmonic against the fretted note (make sure not to pull the string laterally when you fret it) for each of the two string. At least one of them will be out. Slacken that string and move it's bridge contact using the screws in the tailpiece so that the vibrating length of the string is lengthened if the fretted note is sharp, and shortened if it is flat (only a couple of rotations at first). Tune up again and test it out. Repeat as necessary. Edited August 13, 2008 by danlea Quote Link to comment Share on other sites More sharing options...
thepurpleblob Posted August 13, 2008 Share Posted August 13, 2008 (edited) [quote name='Bassmurf' post='260734' date='Aug 12 2008, 12:01 PM']Can anyone help? I've recently changed the strings on my Fender Geddy Lee from the 45-105 Fender strings to a set of 45-105 DRs' - the other strings are fine but it appears that when I play a powerchord high up (say for instance an F on the D string and a C on the Gstring) the note from the G seems to be out a little out. When I changed the strings I changed them one at the time which when I owned a Precision seemed to work ok! Any ideas? Cheers Dan[/quote] Yeh - if you change your strings you need to check the intonation. Even if it's the same make/gauge strings. That thing about changing one string at a time is nonsense. Whip 'em off, give it a clean, and put 'em back Edited August 13, 2008 by thepurpleblob Quote Link to comment Share on other sites More sharing options...
BassMunkee Posted August 21, 2008 Share Posted August 21, 2008 Very helpful, I recently noticed this after having changed my strings, the A string seems a little 'flat' - so I'll check this, thanks! Quote Link to comment Share on other sites More sharing options...
Bassmurf Posted August 22, 2008 Author Share Posted August 22, 2008 Thanks for the info Danlea, worked a bloody treat! Woo-hoo! Cheers! Dan Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.