MoonBassAlpha Posted February 3, 2015 Posted February 3, 2015 Hi all I can think of a number of ways to fix this, is there a standard or best way of doing it? the pickup flatwork is fibre board, but very new looking. Cheers MBA Quote
3below Posted February 3, 2015 Posted February 3, 2015 Dab some superglue in the hole, when set rethread with the pickup screw? If this fails, glue new fibreboard or something under the existing hole, Drill and thread new fibreboard. What are your thoughts? Quote
MoonBassAlpha Posted February 3, 2015 Author Posted February 3, 2015 one option was a small ally plate under the pup with tapped holes Quote
geoffbyrne Posted February 3, 2015 Posted February 3, 2015 I've used a bit of an old credit card glued beneath. G. Quote
MoonBassAlpha Posted February 5, 2015 Author Posted February 5, 2015 Well, the credit card method seemed to work well. Thanks for the tip Geoff! Quote
MoonBassAlpha Posted February 6, 2015 Author Posted February 6, 2015 Well, its working fine, but one small issue, the pickup is in the middle position (Strat) and the 2 and 4 positions sound really thin, not just the usual strat quack sounds. Do you think reversing the polarity of the middle pickup would fix this? The pickup is a neck position Strat one in the middle so is not rwrp, if that makes any odds.. Cheers MBA Quote
geoffbyrne Posted February 6, 2015 Posted February 6, 2015 No prob - sounds like you've wired it out-of-phase - try swapping the two leads around. G. Quote
MoonBassAlpha Posted February 6, 2015 Author Posted February 6, 2015 That's what I thought, reversing the polarity always seems to work for Doctor Who... Quote
MoonBassAlpha Posted February 7, 2015 Author Posted February 7, 2015 ... and it worked a treat for me too! All done now. Thanks for the input. MBA Quote
.jpg.518c69c2d9e1581799f3c11301dc2da5.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.