Icunningham Posted February 6, 2015 Posted February 6, 2015 just looking for a bit of advice on how i could wire my jazz bass controls so that i only have a volume for each pickup and the tone knob on full but not there if you know what i mean ? any help would be very much appreciated Regards Quote
paul_5 Posted February 6, 2015 Posted February 6, 2015 Take the wire from that runs from the second volume control (the one from the outside of that pot to the middle lug of the tone knob) and put that straight to the jack socket. you can remove the wire that runs from the middle lug of the tone control as it's no longer needed. Quote
Ghost_Bass Posted February 7, 2015 Posted February 7, 2015 F**k it! Leo got it right the first time, EVERY Jazz needs a stacked vol/tone control for each pickup with 2 resistors to prevent crosstalk. As simple as this! Quote
Geek99 Posted February 7, 2015 Posted February 7, 2015 Get a fender no-load tone control, bypasses itself when on full. You can feel a slight bump when rotating it. Looks normal Quote
Icunningham Posted February 7, 2015 Author Posted February 7, 2015 Thanks for the replies, I don't want a tone control at all I just want two volumes knobs, I bought a 3 hole control plate so I didn't have to bother at all with the extra knob Quote
.jpg.518c69c2d9e1581799f3c11301dc2da5.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.