MoonBassAlpha Posted February 13, 2015 Share Posted February 13, 2015 I fitted a new 4-way switch to my Korean Squier telecaster to give the extra both pickups in series option. It's a bit more faff than a straight replacement as you need to earth the neck pickup independently from the grounded pickup wire. Got it all together, and it turns out the switch is about 4mm deeper than the cavity. The body is deep enough to take the switch, just that routing it out would have been easier[i] before [/i]wiring it all up. It never even occurred to me that there would be an issue with a proper Fender part. Quote Link to comment Share on other sites More sharing options...
3below Posted February 13, 2015 Share Posted February 13, 2015 Unlucky as this mod will work straight into USA telecaster - having done it. My gotcha was the need to run separate earth to pickup cover in addition to two signal wires. Would be very wary that 4mm route would emerge from back of guitar, a definite measure before attacking with power tool scenario. Quote Link to comment Share on other sites More sharing options...
MoonBassAlpha Posted February 13, 2015 Author Share Posted February 13, 2015 Yes, definitely getting the vernier out for this. I've borrowed a brutal grinder from work, so I'll probably go through the guitar and my table! Quote Link to comment Share on other sites More sharing options...
JPJ Posted February 13, 2015 Share Posted February 13, 2015 I had a similar experience fitting a 5-way to a mates Stratocaster, however on that switch I was able to bend the solder tangs over 90 degrees to provide enough clearance. Quote Link to comment Share on other sites More sharing options...
3below Posted February 13, 2015 Share Posted February 13, 2015 [quote name='MoonBassAlpha' timestamp='1423850853' post='2689767'] Yes, definitely getting the vernier out for this. I've borrowed a brutal grinder from work, so I'll probably go through the guitar and my table! [/quote] The 'brutal grinder' makes for an eye watering vision - pics in action? Quote Link to comment Share on other sites More sharing options...
MoonBassAlpha Posted February 13, 2015 Author Share Posted February 13, 2015 (edited) It's a Bosch GGS 27, like the Motorhead of Dremels, no speed control, on or off, and it really is quite scary. Pics will probably be on an x-rated You've Been Framed in a couple of years time under the section "what was he thinking?" Edited February 13, 2015 by MoonBassAlpha Quote Link to comment Share on other sites More sharing options...
MoonBassAlpha Posted February 23, 2015 Author Share Posted February 23, 2015 Actually, it all went very well, and the series (4th) position is a useful fat, louder setting. Gives a noticeable lift, like the middle position on steroids (cliché alert!) Quote Link to comment Share on other sites More sharing options...
3below Posted February 23, 2015 Share Posted February 23, 2015 Result. The Bosch GGS27 looks the business. The 4 way is a no brainer on Telecasters. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.