GK2001RB issue

[Clarky72]

Anyone had a problem with theirs?

I'm getting the flashing amber light of the protection circuit when I crank past 5 on master vol (woofer vol).

I run it in bridged mode, the fan is working properly so its not overheating (I hope), so it's possibly a power issue? The speakon cable is fine, I dont think there's an issue with my cab either.

[color=inherit][size=1]Any ideas anyone?[/size][/color]

[Raggy]

Not had a problem with mine running bridged.

Have you tried it in dual mono to see if one of the power amps is at fault?

[JPJ]

Is this all the time or just one location? Reason I ask is I run my SM1500 in bridge-mono like you and some venues power supply doesn't seem to keep pace with the amp.

[Clarky72]

[quote name='Raggy' timestamp='1424686493' post='2699056']
Not had a problem with mine running bridged.

Have you tried it in dual mono to see if one of the power amps is at fault?
[/quote]

I only have one cab so I can only run it bridged I believe.

[quote name='JPJ' timestamp='1424686661' post='2699059']
Is this all the time or just one location? Reason I ask is I run my SM1500 in bridge-mono like you and some venues power supply doesn't seem to keep pace with the amp.
[/quote]

It happened twice this weekend in different venues that I've played before with no issues.

[Raggy]

[quote name='Clarky72' timestamp='1424687016' post='2699063']
I only have one cab so I can only run it bridged I believe.
[/quote]

In not sure thats the case, check the manual and the back of the amp, the loads are on there.

[Clarky72]

really? I'll double check, i thought that bridged mode was the only option if you have 1 non-gk cab. cheers.