edpirie Posted February 26, 2015 Share Posted February 26, 2015 (edited) Hi there - sorry if this has been covered before, but the Search function doesn't throw up anything useful. I have just bought an Enabler and there is seriously bad hum when I use it with either my Precision or Jazz. I have a Diago Micropower, and am running it through cans. Any thoughts on this? Anyone else have this problem, or any advice on a PSU that works with the Enabler (if that's the issue). I don't really want to shell out £100 on a new PSU as this is the only pedal I need to power. Thanks for your help. Ed Edited February 27, 2015 by edpirie Quote Link to comment Share on other sites More sharing options...
NoirBass Posted February 27, 2015 Share Posted February 27, 2015 Mines clean as a whistle on a Diago micro power and various other psu's. I would check the earthing on the basses or for any mains hum. Quote Link to comment Share on other sites More sharing options...
edpirie Posted February 27, 2015 Author Share Posted February 27, 2015 Thanks for the reply NoirBass, that's very helpful to know. The problem def seems to be the Diago as another cheapy psu that I dug out works fine with no hum, all other variables being the same. So if yours is OK maybe it's a dodgy unit. Will take it back and try another. Quote Link to comment Share on other sites More sharing options...
NoirBass Posted February 27, 2015 Share Posted February 27, 2015 Good plan, glad it helped. Quote Link to comment Share on other sites More sharing options...
Sibob Posted February 27, 2015 Share Posted February 27, 2015 I had a Micropower that hummed badly. I contacted Diago and they sorted me out, really helpful guys! Si Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.