SOLD SOLD SOLD Bose T1 Tonematch Mixer/Audio Engine £325

[Stompbox]

[size=4] Here’s my Bose T1 Tonematch mixer/audio engine. The T1 has 3 XLR/1/4" Jack combi inputs for connection to microphone sources as well as almost any line level instrument, electric guitar or keyboard directly, plus there are fourth and fifth inputs with ¼” sockets for auxiliary level inputs.[/size]

[size=4]These are impressive pieces of kit, and I was using it for my guitar duo, but it’s been sitting in a cupboard for about 9 months now so it’s got to go.[/size]
[size=4]I was running two vocal mics, the bass guitar, & the drum machine into it as well as having “interval” music into the channel 4/5 auxilliary input.[/size]

[size=4]This unit is marketed with the Bose L1 sound systems, but I was using it with an ordinary power amp and PA speakers, it gives a really great sound. [/size]
[size=4]This is a really good on stage piece of kit – with it fitted to your mic stand you can adjust volume levels and the mix as you go, live on stage.[/size]

[size=4]They have loads and loads of effects and audio processing– you should see the Bose website for the full description. It has vocal processors, plus guitar effects, noise gates, reverb, compressors, digital delays and tone matching for guitars, basses and even different makes of microphone – it has [i][u]massive[/u][/i] capability. See this link to Bose site [url="http://www.bose.com/controller?url=/shop_online/speakers/portable_amplification_systems/index.jsp"]http://www.bose.com/...stems/index.jsp[/url][/size]

[size=4]I’m including the Bose T1 Power supply and the Microphone stand mounting bracket-(which Bose sneakily sell as extras). There is also a Bose fabric/Velcro cover, the hard cover that fits on the face of the unit (and the L1 mounting bracket in the lid), a spare mains input lead, and a folder which has the full manual that I printed and put in a binder– that will save you loads of paper and printer ink![/size] There is also the Bose multiway lead that connects the Tonematch to a Bose L1 series 2 or later which does both audio & power for the mixer.

[size=4]These units do not have a footswitch operation, which is a design flaw, so I had mine professionally fitted with a socket so you can switch the effects for channel 1 on and off with a footswitch – I used it for turning reverb on and off to talk between numbers. I’m including the footswitch and cable.[/size]

[size=4]See links below for the current prices – the whole thing would total over £500. I’m asking £325 including UK mainland tracked/signed for courier service.[/size]

[size=4]Current prices at Gear4music on links below.[/size]
[size=4][url="http://www.gear4music.com/PA-DJ-and-Lighting/Bose-T1-ToneMatch-Engine-Digital-Mixer/114K?origin=product-ads&gclid=CPz-4-ey38QCFVTLtAod61gA7w"]http://www.gear4musi...CFVTLtAod61gA7w[/url][/size]

[size=4][url="http://www.gear4music.com/PA-DJ-and-Lighting/Bose-T1-ToneMatch-Microphone-Stand-Bracket/114M"]http://www.gear4musi...nd-Bracket/114M[/url][/size]

[size=4][url="http://www.gear4music.com/G4M/Bose-T1-ToneMatch-Power-Supply/114L"]http://www.gear4musi...wer-Supply/114L[/url][/size]

[size=4]It’s about 5 years old, but in perfect working order. It has some minor scuff and wear marks on it, but it is in great condition. The only ding on it is on the upper large rotary knob that now has a notch in it where I caught it with something.[/size]

Edited April 13, 2015 by Stompbox

[MB1]

MB1.
BUMP!