Headway EDB-1 Acoustic Preamp For Sale ##SOLD## £70

[Bobby K]

Headway EDB-1 for sale, complete with box, instruction manual and PSU.

Hardly used and in fantastic condition, pretty spotless, but for a very slight scuff on the left side of the unit (tried to show this in the pics, see below)

Here's some blurb about the unit for anyone unfamiliar with it...

[i][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]With the compact Headway EDB-1 (Sheer Acoustic Equaliser Direct Blend) mega multi-purpose external pre-amplifier box you can completely shape your sound with a 5-band interactive EQ, switchable input impedance, and 3-way range switch. The preamp's controls offer acoustic guitar, bass, or violin settings—which cut unwanted low end tones below the useable frequency range of the instrument. This cuts body-handling noise, unwanted resonances, feedback, and violin bowing noise. Feedback and other resonance problems may be further tackled by a very effective, broad-ranging tunable notch filter and a phase reverse control. [/size][/font][/color]

[color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]The Headway EDB-1 preamp's inputs provide plenty of options for any amplification you use. Whether using a 1/4" jack, balanced stereo 1/4" jack, or XLR jack for a microphone, the EDB-1 has got you covered. Headway EDB-1 inputs include mono jack, stereo jack and XLR, through 2 channels. The inputs enable you to blend in an extra pickup, or microphone. You can plug into them with 1 or 2 standard mono jack leads, a jack lead plus an XLR, or a stereo jack lead. An unbalanced 1/4" jack would be related to the Channel 1 input. A balanced 1/4" jack relates to the stereo input (using channels 1 and 2), for an instrument using an internal mic and pickup, being blended internally. Channel 2 mic is an XLR input allowing you to use a microphone onstage, if your instrument does not have a pickup. [/size][/font][/color]

[color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]Each channel's input impedance switches allow you to optimize the voicing for any of the major pickup types, while a huge amount of extra levels can be applied via the gain controls and master volume. [/size][/font][/color]

[color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]Phantom power is also available to jack in and XLR inputs, making the unit friendly for use with quality condenser mics and Instruments wired with no battery inside instrument, but with active pickups needing powering. [/size][/font][/color]

[color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]The outputs use a balanced XLR out and a line out jack. If an earth loop is heard causing hum, you may kill it by pressing the earth lift switch. The two outputs also allow you to split the signal, such as between an acoustic combo amp for stage monitoring and an out front mixing desk. [/size][/font][/color]

[color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]The Headway EDB-1 preamp can be mounted on its rubber feet, carried with you on a belt clip. [/size][/font][/color]

[color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]Powering is via two 9v PP3 ( 6F22 ) batteries, or via plug-in DC Power supply.[/size][/font][/color][/i]

£70 Delivered. Any questions, let me know and cheers for looking



[url="http://s751.photobucket.com/user/Bobbyk_album/media/Headway/DSC_0074_zpsipmoqdl9.jpg.html"][/url][url="http://s751.photobucket.com/user/Bobbyk_album/media/Headway/DSC_0070_zpslztjy8vl.jpg.html"][/url][url="http://s751.photobucket.com/user/Bobbyk_album/media/Headway/DSC_0069_zpsuzmzfnp6.jpg.html"][/url][url="http://s751.photobucket.com/user/Bobbyk_album/media/Headway/DSC_0073_zpskchgln8i.jpg.html"][/url][url="http://s751.photobucket.com/user/Bobbyk_album/media/Headway/DSC_0072_zps2o5wpced.jpg.html"][/url][url="http://s751.photobucket.com/user/Bobbyk_album/media/Headway/DSC_0071_zps3t0devgu.jpg.html"][/url]

Edited April 8, 2015 by Bobby K

[Bobby K]

And sold in record time! :-)