Norris Posted April 27, 2015 Share Posted April 27, 2015 Short of wiping them down with a clean dry cloth after use, do any of you have suggestions for prolonging the life of your strings? I find that even being meticulous I start to get signs of rust after 6 months or so Quote Link to comment Share on other sites More sharing options...
Norris Posted April 27, 2015 Author Share Posted April 27, 2015 Just to add, I have recently started using Finger Ease (like Fast Fret but in an aerosol can). Is this likely to help or hinder? Quote Link to comment Share on other sites More sharing options...
seymourfluid Posted April 27, 2015 Share Posted April 27, 2015 The decision for me is carefully wiping down my strings and guitar, using some fast fret then casing it straight away, or putting it on the stand, getting another beer and talking to girls. Unlike the artist formally known as the artist formally known as Prince, as much as I love my guitar, I like girls and beer more. Quote Link to comment Share on other sites More sharing options...
Coilte Posted April 27, 2015 Share Posted April 27, 2015 Rust should not be a problem after six months, although it could be due to the acid in your sweat. Perhaps you should consider putting a sachet of silica gel in your guitar case. The only other thing you can do, besides wiping down the strings after each practice, is to wash your hands before playing. Quote Link to comment Share on other sites More sharing options...
rogerstodge Posted April 27, 2015 Share Posted April 27, 2015 I've never had rusty strings and I've never wiped my strings down after a show Quote Link to comment Share on other sites More sharing options...
JTUK Posted April 27, 2015 Share Posted April 27, 2015 Agree, rust should not be an issue on strings. Maybe that brand don't use decent metal..or you have a lot of stuff coming off your body not mixing too well with your strings. I don't bother wiping my strings but then I rarely sweat at gigs either. I do wash my hands before playing if dirty or if there is anything on them like oil or grease. I'll change the strings when they feel off which is sooner that them sounding my definition of dead Quote Link to comment Share on other sites More sharing options...
Hobbayne Posted April 27, 2015 Share Posted April 27, 2015 I dont bother wiping them after a gig. I always change my strings every 3 months anyway. Quote Link to comment Share on other sites More sharing options...
RockfordStone Posted April 27, 2015 Share Posted April 27, 2015 i tend to not do a lot with mine, occasionally i will clean them with string cleaner, but generally i just play them until they are so far dead there is no hope Quote Link to comment Share on other sites More sharing options...
stingraybassman Posted April 27, 2015 Share Posted April 27, 2015 Are you using steel rounds or nickel? Be intrigued to see if there is much of a difference corrosion wise. Quote Link to comment Share on other sites More sharing options...
MiltyG565 Posted April 28, 2015 Share Posted April 28, 2015 (edited) [quote name='Coilte' timestamp='1430156657' post='2758493'] Rust should not be a problem after six months, although it could be due to the acid in your sweat. Perhaps you should consider putting a sachet of silica gel in your guitar case. The only other thing you can do, besides wiping down the strings after each practice, is to wash your hands before playing. [/quote] Pretty much just this. It could also be to do with the type of string you use. Weirdly, I find that Steels don't rust nearly as easily as nickel wounds. Acidic sweat is a problem. It's more of a problem on guitar than on bass. I know guitarists that change their strings every few weeks because their sweat is so corrosive on their strings. Let me know what strings you're currently using. Different types of strings and different brands use different qualities of material. Hopefully we can find something more suitable. edit - also, have a read of my blog (link in signature). It explains a bit about why strings go bad, although I didn't include acidic sweat. Edited April 28, 2015 by MiltyG565 Quote Link to comment Share on other sites More sharing options...
Norris Posted April 28, 2015 Author Share Posted April 28, 2015 I've used Ernie Ball Regular Slinky strings for years (the bright yellow pack) Quote Link to comment Share on other sites More sharing options...
MiltyG565 Posted April 28, 2015 Share Posted April 28, 2015 [quote name='Norris' timestamp='1430220319' post='2759042'] I've used Ernie Ball Regular Slinky strings for years (the bright yellow pack) [/quote] Try a set of steel strings and see if you get better luck with them. I always recommend D'Addario Prosteels as a high-quality steel string at a reasonable price. Quote Link to comment Share on other sites More sharing options...
stingraybassman Posted April 28, 2015 Share Posted April 28, 2015 [quote name='MiltyG565' timestamp='1430179410' post='2758739'] edit - also, have a read of my blog (link in signature). It explains a bit about why strings go bad, although I didn't include acidic sweat. [/quote] Good blog that Milty! Nice to see a seller not just bothered about selling stuff. Still amazes me how little value people put on strings. Quote Link to comment Share on other sites More sharing options...
lowhand_mike Posted April 28, 2015 Share Posted April 28, 2015 (edited) try Elixirs, they stay good for yonks and the micro coating stops any corrosion, very highly recommended though they are not cheap they should outlast 2-3 sets of normal strings Edited April 28, 2015 by lowhand_mike Quote Link to comment Share on other sites More sharing options...
Funky Dunky Posted April 28, 2015 Share Posted April 28, 2015 (edited) Not claiming to be an expert in this by any means, but my experience is thus: ● never had strings go rusty ● my instrument lives in its case when not being played, never sits out. ● I don't wipe the strings down, because back in the day when I played guitar I found that doing so only left wee bits of fluff in the strings, which were a pain to remove. ● I find a set of strings lasts me about six months before showing signs of deadening. ● I use nickel strings ● The only prerequisite is that I always wash my hands before playing. ● from my experience, Ernie Ball stainless steel strings are just the worst, they go dead quickly, they have the most squeak and handling noise and unremarkable tone. I hate them. Others love them though, so fair play. Edited April 28, 2015 by Funky Dunky Quote Link to comment Share on other sites More sharing options...
Hobbayne Posted April 28, 2015 Share Posted April 28, 2015 I recently moved over to E.B nickle strings after using a mates bass and much preferred the feel and tone to the Rotosound steels I had been using for years. I find the zing goes about the same time as the Rotos, so I dont hold with the belief in some players that nickles die quicker. Quote Link to comment Share on other sites More sharing options...
MiltyG565 Posted April 28, 2015 Share Posted April 28, 2015 [quote name='stingraybassman' timestamp='1430228727' post='2759194'] Good blog that Milty! Nice to see a seller not just bothered about selling stuff. Still amazes me how little value people put on strings. [/quote] Thanks! As some on here know, StringPing.com isn't just me trying to sell strings, it's a bit of a labour of love. I'm going to be writing more blogs for it in future Quote Link to comment Share on other sites More sharing options...
MiltyG565 Posted April 28, 2015 Share Posted April 28, 2015 [quote name='Hobbayne' timestamp='1430240713' post='2759413'] I recently moved over to E.B nickle strings after using a mates bass and much preferred the feel and tone to the Rotosound steels I had been using for years. I find the zing goes about the same time as the Rotos, so I dont hold with the belief in some players that nickles die quicker. [/quote] My experience of Ernie Ball Slinkies is that they hold their tone quite well. Other brands that I've used haven't lasted more than a few weeks, and some last unreasonably long - far greater than you'd reasonably expect. It's all relative. The variations are in the brand, IME. Quote Link to comment Share on other sites More sharing options...
LayDownThaFunk Posted April 28, 2015 Share Posted April 28, 2015 If you like Slinkys, try D'Addario nickels. Quote Link to comment Share on other sites More sharing options...
Funky Dunky Posted April 28, 2015 Share Posted April 28, 2015 (edited) https://youtu.be/ZpRFcF6BlzA This is a decent comparison video. The nickel Ernie Balls sound pretty good. I'm yet to have a problem with the string life of nickels. I've been using Dunlop Super Brights, they're great on my Squier P but I don't like them just as much on my Sterling (is that weird?) So I'm about to take the plunge and shell out for DR Sunbeams. Edited April 28, 2015 by Funky Dunky Quote Link to comment Share on other sites More sharing options...
Coilte Posted April 28, 2015 Share Posted April 28, 2015 [quote name='Funky Dunky' timestamp='1430243181' post='2759449'] So I'm about to take the plunge and shell out for DR Sunbeams. [/quote] I love the Sunbeams.Great tone and feel. I have read good things about Fodera nickels too. Supposed to be similar to Sunbeams with perhaps a little more tension. Might try them next. Quote Link to comment Share on other sites More sharing options...
Funky Dunky Posted April 28, 2015 Share Posted April 28, 2015 Interesting. I loved the Dunlop SBs but I think I would prefer a little extra tension so I can dig in on the lower strings. The Foderas will no doubt be pricey, similar to DRs? I didn't even know Fodera made strings. Quote Link to comment Share on other sites More sharing options...
Coilte Posted April 28, 2015 Share Posted April 28, 2015 [quote name='Funky Dunky' timestamp='1430243908' post='2759465'] The Foderas will no doubt be pricey, similar to DRs? I didn't even know Fodera made strings. [/quote] Yeah, they'd be in and around the same price as the DR's. Worth doing some research on them. Seemingly they are hand made by just three people in a small factory in Brooklyn. http://www.ebay.co.uk/sch/i.html?_odkw=fodera+nickels&_from=R40&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.Xfodera+nickels+45-105.TRS0&_nkw=fodera+nickels+45-105&_sacat=0 Quote Link to comment Share on other sites More sharing options...
stingraybassman Posted April 28, 2015 Share Posted April 28, 2015 [quote name='MiltyG565' timestamp='1430241923' post='2759433'] Thanks! As some on here know, StringPing.com isn't just me trying to sell strings, it's a bit of a labour of love. I'm going to be writing more blogs for it in future [/quote] Get writing then, don't keep stringing us along..... I'll leave now. Quote Link to comment Share on other sites More sharing options...
Funky Dunky Posted April 28, 2015 Share Posted April 28, 2015 [quote name='Coilte' timestamp='1430244360' post='2759478'] Yeah, they'd be in and around the same price as the DR's. Worth doing some research on them. Seemingly they are hand made by just three people in a small factory in Brooklyn. http://www.ebay.co.uk/sch/i.html?_odkw=fodera+nickels&_from=R40&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.Xfodera+nickels+45-105.TRS0&_nkw=fodera+nickels+45-105&_sacat=0 [/quote] Thanks for posting that link. After reading about the Foderas, I navigated and found DR Sunbeams for £20 delivered! Happy days! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.