Guest MoJo Posted May 3, 2015 Posted May 3, 2015 Hi all Can anyone recommend the best place to obtain some B50K minipots with a centre detent to replace the non-detent type minipots in my Peavey Fury V? Are these likely to have a linear or audio taper? I also need a new blend control pot. This is a dual pot marked B500K Here is the wiring diagram below. Thanks Quote
icastle Posted May 3, 2015 Posted May 3, 2015 A is log, B is linear. Therefore, a B50k is linear. Quote
KiOgon Posted May 3, 2015 Posted May 3, 2015 I'll have a rumage in my drawers in the morning - can't promise Quote
Guest MoJo Posted May 3, 2015 Posted May 3, 2015 [quote name='icastle' timestamp='1430685256' post='2763752'] A is log, B is linear. Therefore, a B50k is linear. [/quote] I can remember reading somewhere that pots manufactured in other markets can often be marked the other way round, A=linear & B=log Quote
Guest MoJo Posted May 3, 2015 Posted May 3, 2015 [quote name='KiOgon' timestamp='1430685284' post='2763753'] I'll have a rumage in my drawers in the morning - can't promise [/quote] Thank you Quote
icastle Posted May 4, 2015 Posted May 4, 2015 [quote name='MoJo' timestamp='1430687306' post='2763782'] I can remember reading somewhere that pots manufactured in other markets can often be marked the other way round, A=linear & B=log [/quote] There were some issues around standardisation of codes some years ago, but that doesn't apply here because 'B' wasn't used back then. My example is the general accepted standard now. The 'old standard' used A for linear and C for log. If you'd specified 'A50k' then things could have got confusing. Quote
tauzero Posted May 4, 2015 Posted May 4, 2015 They'll be linear as it's a symmetrical configuration - linear is symmetrical about the centre detente, log isn't. And I suspect that centre-detented log pots would be rather rare birds too. [url="http://www.allparts.uk.com/products/50k-mini-pot-centre-detent-audio-taper-split-knurled-shaft"]http://www.allparts.uk.com/products/50k-mini-pot-centre-detent-audio-taper-split-knurled-shaft[/url] [url="http://www.advancedguitarcentre.co.uk/catalog/product/view/id/9774/"]http://www.advancedguitarcentre.co.uk/catalog/product/view/id/9774/[/url] Quote
KiOgon Posted May 4, 2015 Posted May 4, 2015 I have 5 x 50K & 1 x 500K Dual; https://www.dropbox.com/s/fwfe6nd0zgyfnu1/2015-05-04%2009.40.38.jpg?dl=0 Are they the sort you're after? John Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.