bassist_lewis Posted May 4, 2015 Share Posted May 4, 2015 I'm putting a pedalboard together with the following pedals: agent 00Funk, 3 Leaf Octabvre and Creation audio grizzly bass. I want to power them with the pedaltrain Volto as its the most compact and convenient way. My question is if the volto puts out 2000mA and each pedal draws 25-250mA (so total draw of 700-800mA) am I going to blow up the pedals with all the extra milliamps kicking about unused? Or will the volto only give out what each pedal asks for - as it were. Cheers Quote Link to comment Share on other sites More sharing options...
JapanAxe Posted May 4, 2015 Share Posted May 4, 2015 (edited) No you definitely won't blow up your pedals. The Volto will happily supply any current [i]up to[/i] 2000mA. The lower the current you actually draw, the longer the Volto battery will last. Edited May 4, 2015 by JapanAxe Quote Link to comment Share on other sites More sharing options...
bassist_lewis Posted May 4, 2015 Author Share Posted May 4, 2015 Just what I needed to hear! Thanks! Quote Link to comment Share on other sites More sharing options...
bobbass4k Posted May 4, 2015 Share Posted May 4, 2015 (edited) JapanAxe beat me to it. The current rating is the maximum current that the Volto can supply, your pedals will only draw the current that they need, so as long as the total draw is less than 2A (2000mA), you're fine. You may however notice that your pedals get noisier the closer you get to the limit. It's worth noting that voltage doesn't operate this way though, providing more voltage than something is rated for will probably blow it up. Not everything may actually explode, but I find assuming it will to be the best defense against doing it. Edited May 4, 2015 by bobbass4k Quote Link to comment Share on other sites More sharing options...
John_P Posted May 4, 2015 Share Posted May 4, 2015 Japanaxe is correct. It's all about the current draw, from the pedals so just total them up and you should be fine with power to spare. Quote Link to comment Share on other sites More sharing options...
JapanAxe Posted May 4, 2015 Share Posted May 4, 2015 [quote name='bobbass4k' timestamp='1430735291' post='2764068'] It;s worth noting that voltage doesn't operate this way though, providing more voltage than something is rated for will blow it up. [/quote] A point well worth making. There are some pedals that can operate, and may give different/better results, at higher voltages than specified (e.g. many analog delays, chorus and flanger pedals), but you need to know the specs of all the chips inside before risking this! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.