LewisK1975 Posted May 10, 2015 Share Posted May 10, 2015 Hey guys, Just wondering if anyone has experienced this? Started after about 3 songs into last nights set - Loud crackling somewhere in the pre-amp, know its in the pre-amp coz I could see the vu meter jumping when it was happening... Here's hoping its something simple!! Was thinking it could be the Valve / dodgy input socket / dirty pot ?? Amp was bought new in 2006, I am the only owner.. Cheers!! Quote Link to comment Share on other sites More sharing options...
BruceBass3901 Posted May 10, 2015 Share Posted May 10, 2015 I would say contact Ashdown about it as there customer service is normally excellent. It sounds like it could be a valve or dirty input to me. Does it stop when the valve drive is disengaged? Quote Link to comment Share on other sites More sharing options...
largo Posted May 10, 2015 Share Posted May 10, 2015 Are you sure it's the amp and not a loose jack connection at the guitar end? I've had that happen before. Quote Link to comment Share on other sites More sharing options...
LewisK1975 Posted May 10, 2015 Author Share Posted May 10, 2015 Got it on test in the house now - running the ipod thru it and waiting for something to happen... Have heard a bit of noise on the pots, hopefully it's as simple as that... Bruce, I don't or never have used the valve drive...always disliked the sound of it! Largo - Its possible, could also be something in the pedal board I guess, although didn't have any issues when I switched to my backup amp for the second set on last night's gig... Quote Link to comment Share on other sites More sharing options...
Subthumper Posted May 10, 2015 Share Posted May 10, 2015 Give it a thump!! Bit crude but usually finds anything loose. Give everything a good wiggle whilst it's running. Hopefully it's just a service issue. Quote Link to comment Share on other sites More sharing options...
Sparky Mark Posted May 14, 2015 Share Posted May 14, 2015 Sounds like the pre amp valve is on the way out. Do you still get the crackling when you turn the pre amp to solid state only? If not then the valve needs replacing. Although pre valves last much much longer than output valves they can fail prematurely. Quote Link to comment Share on other sites More sharing options...
LewisK1975 Posted May 14, 2015 Author Share Posted May 14, 2015 [quote name='Sparky Mark' timestamp='1431570299' post='2772709'] Sounds like the pre amp valve is on the way out. Do you still get the crackling when you turn the pre amp to solid state only? If not then the valve needs replacing. Although pre valves last much much longer than output valves they can fail prematurely. [/quote] It's one of those annoying intermittent faults - have had it running for hours at home with an ipod playing through it with no issues - dont think I could trust it on a gig again now though...I've never engaged the valve drive for any length of time and certainly don't use it for gigging, don't like the sound of it.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.