Skybone Posted June 28, 2015 Posted June 28, 2015 Does anyone know if it would be possible to rewire a cab to a different Ohm rating? For example, if a 4 x 10 cab has an 8 ohm rating (ie, 4 x 8 ohm speakers), would it be possible to rewire it so that it would become a 4 ohm cab, without changing the speakers? Just curious. Quote
Dad3353 Posted June 29, 2015 Posted June 29, 2015 (edited) [quote name='Skybone' timestamp='1435531053' post='2809837']... Just curious. [/quote] There are only a certain number of ways to connect speakers in such a cab. Assuming, then, all speakers to be 8 ohm, we can have any of these 6...[list=1] [*]4 in parallel = 2 ohm [*]3 in parallel,1 in series = 10.67 ohm [*]2 in parallel, 2 in series = 20 ohm [*]2 in parallel, 2 in parallel = 8 ohm [*]1 in parallel, 3 in series = 6 ohm [*]4 in series = 32 ohm [/list] ... and that's it. The only solutions which enable each speaker to receive the same power are 1, 4 and 6. All the others have unbalanced sharing of the power by the speakers. Does this satisfy your curiosity..? Edited June 29, 2015 by Dad3353 Quote
Bill Fitzmaurice Posted June 29, 2015 Posted June 29, 2015 [quote name='Skybone' timestamp='1435531053' post='2809837'] if a 4 x 10 cab has an 8 ohm rating (ie, 4 x 8 ohm speakers), would it be possible to rewire it so that it would become a 4 ohm cab, without changing the speakers? [/quote]As explained above, no. And if the reason is the usual 'to get all the watts out of my amp', it wouldn't matter anyway. Quote
mikebass84 Posted June 29, 2015 Posted June 29, 2015 Buy another 4x10 at 8ohm. Stack them. 4ohm Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.