andy67 Posted July 7, 2007 Share Posted July 7, 2007 afternoon folks I have a little problem..and the missus will concur! anyway both my amp heads, trace v4 all valve and svt 3pro, are 4 ohms min load and as of today I have parted with my Ashdown mag 810 in order to buy a second ampeg b410 hlf. I love the sound from these cabs, both cabs are 4 ohms and wired in parallel, can I daisy chain them connecting them to one amp or will I have to rewire them in series form? I want to run them as if they where an 8x10, only alittle easier to carry around! this is where my technical ability falls on its erse! ta for noo andy Quote Link to comment Share on other sites More sharing options...
bass_ferret Posted July 7, 2007 Share Posted July 7, 2007 Er - No. You can only one run cab or two in series. There is a sticky that explains all about impedence. Quote Link to comment Share on other sites More sharing options...
Hamster Posted July 7, 2007 Share Posted July 7, 2007 (edited) [quote name='bass_ferret' post='28360' date='Jul 7 2007, 06:17 PM']Er - No. You can only one run cab or two in series. There is a sticky that explains all about impedence.[/quote] Er - Yes / No. If you daisy chain them you will end up with 2 ohms impedance. You can run both cabs if you use a series cable or rewire them to series. If you PM OBBM and ask him to make up a series cable you will be sorted. IMHO much easier than messing with your cabs. Hamster Edited July 7, 2007 by Hamster Quote Link to comment Share on other sites More sharing options...
andy67 Posted July 8, 2007 Author Share Posted July 8, 2007 thanks a lot for the info guys! hamster - cheers for this as I was getting a little nervous about messing with the cabs wiring! I'll PM OBBM many thanks andy Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.