Jump to content
Why become a member? ×

Class D amps lack uumph?


Guest MoJo
 Share

Recommended Posts

It's one of those statements I've heard more than once, 'class D amps can be loud but they don't carry. You can't hear them at the back of the room'. Is this another urban myth. Volts are volts, right?

Link to comment
Share on other sites

[quote name='MoJo' timestamp='1437245646' post='2824674']
It's one of those statements I've heard more than once, 'class D amps can be loud but they don't carry. You can't hear them at the back of the room'. Is this another urban myth. Volts are volts, right?
[/quote]

http://basschat.co.uk/topic/266141-wee-article-to-help-demystify-amps/

Link to comment
Share on other sites

Class D definitely lacks slam in my experience.

I swapped out a Genz Shuttle 9.2 head for a Gallien GT700RB and you can feel the GK rumble in your guts - the Genz couldnt generate that.
I have the 700 in a rack along with a GK MBFusion so can compare both really easily at gig volume and the class D still doesnt have the depth and slam that the 700 has.

Link to comment
Share on other sites

[quote name='MoJo' timestamp='1437245646' post='2824674']
Volts are volts, right?
[/quote]Right. That doesn't mean that some Class D amps might not be anemic, but don't blame it on being Class D, blame it on poor design by the manufacturer. Powersoft wouldn't be where it is if there was something inherently deficient about Class D.

Link to comment
Share on other sites

I've had a PJB Flightcase and PB300 for a few months. I A/B it with my Peavey Max 160 into an Ampeg B115E. So that's SS discrete into Ferrite speaker compared with SMPS + class D into Neo's.

They are very different in tone when set with a flat eq. I would say the SS bottom end is more dominant against the low mids for the Class D. To get a similar umph the bass is at 2 compared to 12 oclock and the low mids at 10. But I'm not sure this is a lack of umph in class D amps as more the clearer tone of a newer amp design. The umph is there to be dialed in as are more tonal options.

The thing I've noticed most is the definition. Notes are more precise and also getting used to hearing the higher harmonics. I was comfortable with my old rig and I think it takes some listening time to adjust.

Link to comment
Share on other sites

[quote name='grandad' timestamp='1437258481' post='2824740']
I've had a PJB Flightcase and PB300 for a few months. I A/B it with my Peavey Max 160 into an Ampeg B115E. So that's SS discrete into Ferrite speaker compared with SMPS + class D into Neo's.

They are very different in tone when set with a flat eq. I would say the SS bottom end is more dominant against the low mids for the Class D. To get a similar umph the bass is at 2 compared to 12 oclock and the low mids at 10. But I'm not sure this is a lack of umph in class D amps as more the clearer tone of a newer amp design. The umph is there to be dialed in as are more tonal options.

The thing I've noticed most is the definition. Notes are more precise and also getting used to hearing the higher harmonics. I was comfortable with my old rig and I think it takes some listening time to adjust.
[/quote]

I think if you're comparing a Phil Jones Flightcase and PB300 with a Peavey Max 160 into a Ampeg B115e the fact that one rig is Class AB and the other Class D is so far down the list of variables as to be irrelevant.

Link to comment
Share on other sites

Ive only ever used 1 class d, an ampeg pf. I thought it was awful - it was lacking in umph but also there seemed to be a kind of weird graininess to the sound, a slightly abrasive sounding texture that i hated.

Link to comment
Share on other sites

When people say oomph... They probably mean those unusable sub bass frequencies that muddy up the entire mix, leaving the kick drum buried. Also due to the wavelength of bass frequencies being longer than higher, they would be more pronounced at the back of the room.
I've had both Class D's and your back breakers, i've pony sounding amps in both fields and good sounding amps from both too. That's why you should always try before you buy.
Another problem is that a lot of bass players just don't know how to EQ their amps properly which in turn gives poor performance and poor sound from the amp.

Just my 2 pence rant :)

Link to comment
Share on other sites

The reason behind the original post is that I own both a TC Electronic BG250-115 and a Peavey BAM210. The latter is twice the weight of the former. I've been gigging the BG250 for a few weeks now in small / medium pub gigs and personally, I think it sounds great. I've not got a wireless system so I'm never more than 10 feet from it.

Recently a guy was selling his BG250 on eBay because he didn't think it was 'throwing it out to the back of the room'. I was surprised when I tried the BG250 out at PMT as to how loud it was and how warm sounding too. Nothing like the demos on YouTube. My fear is, I suppose, that it sounds great up close but lacks the uumph to project that sound 30 feet away.

Link to comment
Share on other sites

[quote name='MoJo' timestamp='1437293213' post='2824817']
The reason behind the original post is that I own both a TC Electronic BG250-115 and a Peavey BAM210. The latter is twice the weight of the former. I've been gigging the BG250 for a few weeks now in small / medium pub gigs and personally, I think it sounds great. I've not got a wireless system so I'm never more than 10 feet from it.

Recently a guy was selling his BG250 on eBay because he didn't think it was 'throwing it out to the back of the room'. I was surprised when I tried the BG250 out at PMT as to how loud it was and how warm sounding too. Nothing like the demos on YouTube. My fear is, I suppose, that it sounds great up close but lacks the uumph to project that sound 30 feet away.
[/quote] it all depends on how big his room is doesn't it? If it sounds good to you- don't worry about it and just play it.

Link to comment
Share on other sites

Guest bassman7755

One possible factor is that a lot of people are coming to class D after using other dedicated bass amps with some amount of baked in tone, whereas my previous setup was a modular rig with a PA power amp and to my ears the class D amps behave much the same as that setup i.e. clean and flat at the output stage with all the "tone" coming from the preamp.

Interestingly class D is gaining ground in certain audiophile circles, this one in particular is interesting ...
http://www.templeaudio.net/bantamgold.html

Link to comment
Share on other sites

My 2p's worth. I own both a class A and D amp. In the studio I can tell no difference what so ever between them, however when playing live, I find the volume in both to be of equal measure, but to my ears the class D amp sounds like it is lacking in depth, whereas the class A seems to have that in bucketloads, which I can actually both feel and hear onstage through my cabinet. This is with both EQ settings in similar configuration. Not exactly an answer with any scientific based rationale I know, but that just my playing/gigging experience of these amps, and I'm sure I tell the difference in a blind test.

Link to comment
Share on other sites

[quote name='LukeFRC' timestamp='1437296206' post='2824842']
it all depends on how big his room is doesn't it? If it sounds good to you- don't worry about it and just play it.
[/quote]

I do like it. So much in fact that I was considering getting a second to stack on top for bigger gigs, save me having to wrestle with the back breaking 93lbs that is the BAM210

Link to comment
Share on other sites

In answer to your question, this nonsense doesn't even qualify as an "urban myth".

Play your gear knowing that you get a good sound, on stage and in the room. Another cab is always a good idea. You tone improves 500% when you add a second cab.

There are many guys out there incapable of getting a good sound out of any amp. Generalisations are pointless in this discussion.

Link to comment
Share on other sites

Nobody even yet mentioned the fact of all these different cabs and speakers. . One 210 will be different to the next and to a 115 or 212. To get a proper comparison, surely you'd have to take two or more heads along to one gig or room and put them into the same cab in the same context?
I agonised for ages when buying an amp, but now I'll spend years learning its ins and outs through my cabs. A beautiful journey! :-)

Link to comment
Share on other sites

It's a simple and tangible difference. I've got both and whilst both put out good sounds IMO,
there is sound and then there is sound. Maybe it doesn't matter at the Dog and Duck and
the reasons are understandable but you can guess which gets the rave reviews from bass players
and most of them wouldn't recognise the gear in itself so the comments aren't because they see/hear...
they just hear and feel.

The other pointer is drummers... and the comment ratio is the about the same.

Edited by JTUK
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...