Geek99 Posted September 10, 2015 Posted September 10, 2015 (edited) I've got five of these as I bought a few more once I'd tried them. I have imposed my own one p bass limit (gasp) so these have been gathering dust Picture here [url="https://onedrive.live.com/redir?resid=F1B48FF289BAE6D2!758&authkey=!AOSpE_f2EW-Eb04&v=3&ithint=photo%"]https://onedrive.liv...3&ithint=photo%[/url] Fit my Japanese bitsa and also a mex p bass I once owned but obviously you may need to move a screw slightly -happy to supply measurements upon request £9 to you plus second class postage at cost £2.80 PayPal gift (no fees please) or bank transfer Nb 1. these do not fit a jap 70s closet classic particularly well, (I'm told) - not tried it myself . 2. Matt freeman model has a wide control cavity and reportedly a tiny gap is present but suggest that would also be true of any aftermarket plate 3. Affinity p bass needs slight sanding around neck joint and the pickup moving slightly 4. There is no cutout for the truss rod, but you can easily file one or sand one out with a dremel Edited November 28, 2015 by Geek99
Geek99 Posted October 19, 2015 Author Posted October 19, 2015 two still available, happy to combine postage if you want more than one
Geek99 Posted October 19, 2015 Author Posted October 19, 2015 (edited) I can't honestly say - should do as I had a squir vmp and a generic plate fitted given a slight tilt to fit around the pup (you had to put the next side on first and pop it into place) screws were spot on. Nothing is guaranteed with plates Only things I know have issues are listed above Edited October 19, 2015 by Geek99
Geek99 Posted October 19, 2015 Author Posted October 19, 2015 And responded One left, subject to payment
Recommended Posts