lone_groover Posted November 1, 2015 Share Posted November 1, 2015 Hi, I've just purchased a 1970's Sound City B120 head. Any products you could recommend to bring the tolex back to life would be appreciated. Thanks - Nick Quote Link to comment Share on other sites More sharing options...
HowieBass Posted November 1, 2015 Share Posted November 1, 2015 Tolex is pretty hard wearing so I'd be tempted to use a damp cloth first and then when dry use something like a car dash cleaner spray then buff off with a duster or microfibre cloth. Quote Link to comment Share on other sites More sharing options...
Muppet Posted November 1, 2015 Share Posted November 1, 2015 Is it black? I've used shoe polish in the past. Just remember to 'polish' it obviously. Quote Link to comment Share on other sites More sharing options...
Macker5 Posted November 1, 2015 Share Posted November 1, 2015 I have used Nomad Amp and Case cleaner with good results - This is the blurb........ Amp & Case Cleaner and Conditioner Just buy a new or used amp? Looking to restore your old amp to a like new shine? Clean, condition, preserve & shine your amp or case with our special formula. It works great on all leather, vinyl & rubber AMPS, CASES, DRUM CHAIRS & ELECTRONIC RUBBER PADS and delivers a long lasting dry to touch new shine finish Our proprietary formula embeds itself safely in fibers of leather, vinyl & rubber creating a moisture resistant barrier. It does not attract dust because it is non greasy. We even add UV protectants. This product contains no harsh chemicals and is 100% non abrasive. Quote Link to comment Share on other sites More sharing options...
Guest canonman Posted November 1, 2015 Share Posted November 1, 2015 Warm soapy water and then a bit of boot polish, once it's dry, has worked well for me. Quote Link to comment Share on other sites More sharing options...
Geek99 Posted November 2, 2015 Share Posted November 2, 2015 Flash and a dab of fairy liquid works Quote Link to comment Share on other sites More sharing options...
Phil Starr Posted November 2, 2015 Share Posted November 2, 2015 Warm soapy water (fairy liquid is fine) and a soft plastic bristled brush (old toothbrush) for getting into the little crevices, obviously making sure you don't get water inside the case. One trick some of the shops use is a bit of WD40 polished in afterwards. Gives it a nice shine at the expense of a thin film of oil. Quote Link to comment Share on other sites More sharing options...
BILL POSTERS Posted November 2, 2015 Share Posted November 2, 2015 (edited) This is how we used to clean up rexine in the ' reconditioned' radio and tv shop I worked at in the 60s when rexine and tolex were common. dont try itwith paper backed rexine on dansettes though.. 1001 carpet cleaner, capful in a saucer of warm water, fairly stiff brush in a circular motion a patch at a time, then wipe it off with a damp cloth. Takes the shine off with all the old grime, so you need to polishit afterwards. Bad stains come off with car wheel cleaner, but you have to be quick. Edited November 2, 2015 by BILL POSTERS Quote Link to comment Share on other sites More sharing options...
Mykesbass Posted November 2, 2015 Share Posted November 2, 2015 Car bumper and trim restorer. Quote Link to comment Share on other sites More sharing options...
bertbass Posted November 2, 2015 Share Posted November 2, 2015 Black boot polish as had been said above. Quote Link to comment Share on other sites More sharing options...
BILL POSTERS Posted November 2, 2015 Share Posted November 2, 2015 [quote name='Mykesbass' timestamp='1446466057' post='2899492'] Car bumper and trim restorer. [/quote] Brilliant for putting the shine back, especially the £1 shop stuff that foams up slightly. Cockpit spray works well too. Quote Link to comment Share on other sites More sharing options...
ivansc Posted November 4, 2015 Share Posted November 4, 2015 Ambersil. I used to work at a Cash Converters & we used that stuff on everything for a nice "as new " smell AND look. Great on tolex but in fact works great on anything. Quote Link to comment Share on other sites More sharing options...
BILL POSTERS Posted November 4, 2015 Share Posted November 4, 2015 [quote name='ivansc' timestamp='1446600868' post='2900784'] Ambersil. I used to work at a Cash Converters & we used that stuff on everything for a nice "as new " smell AND look. Great on tolex but in fact works great on anything. [/quote] Which Ambersil ? The only one I know is switch cleaner. But they probably make other stuff as well. Quote Link to comment Share on other sites More sharing options...
taunton-hobbit Posted November 4, 2015 Share Posted November 4, 2015 (edited) Ambersil make polish/renovation spray-used it for years on the insides of pub fruit machines so that they looked presentable when we moved them from site to site...it's good, but as far as I can remember, any silicone car finish spray will do the same job, without the pleasant smell, but cheaper. Incidentally...they use WD40 on steel-hulled Lifeboats, it makes them look shiny.......... Edit- Its's been a few years...we used 'amberclens' (blue can)...& 'natsil' (brown can) Neither show up on Radiospares site...I would again suggest cheap car silicone spray, buffed to a shine after it dries..... Edited November 4, 2015 by taunton-hobbit Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.