Jump to content
Why become a member? ×

Four cheap 42mm-nut necks for projects, reduced.
£110

alyctes
 Share

Recommended Posts

alyctes Grand Master

alyctes

Posted
Posted (edited)

Four necks, all for right-handed 4-string basses. All are sold without hardware (the Vintage will have its TR cover). All are 42mm nut.

They are:
Neck A: no-name unshaped paddle-type headstock; it came from Harrier Guitars, a couple of years ago. This is unused, but has picked up a chip on the end of the fingerboard (since tidied up). Heel is 61mm wide, so quite narrow. 20 frets.
£30 posted.

Neck B: no-name Thunderbird-style. Tuners and string tree not included unless we come to an agreement. Came off an eBay bitsa (with a J-type yellow body). Heel is 63mm wide. 21 frets.
£30 plus P+P.

Neck C: KCC. Decent enough given the source. Some wear. Heel is 65mm wide, quite wide indeed. 21 frets.
£20 posted.

Neck D: Vintage (JHS). Black. TRC cover included; tuners not included unless we come to an agreement. Heel is 63.5mm wide. 24 frets.
£30 posted.

Pics are here: [url="http://s1295.photobucket.com/user/alyctes/library/wide-nut%20necks?sort=3&page=1"]http://s1295.photobu...s?sort=3&page=1[/url]

Apologies for my rubbishy photography skills. I've tried to keep the pics in groups, bookended by headstock pics.

Edited by alyctes
Link to comment
Share on other sites
  • 3 weeks later...
alyctes Grand Master

alyctes

Posted
  • Author
Posted (edited)

Now with actual detail (heel widths and frets) which any prospective buyer would want to know... I can only plead long hours and daft fatigue levels, followed by a trip to hospital.

Edited by alyctes
Link to comment
Share on other sites
  • 2 weeks later...
  • 3 weeks later...
  • 3 weeks later...
  • 2 weeks later...
  • 3 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...
alyctes Grand Master

alyctes

Posted
  • Author
Posted (edited)

[quote name='tommorichards' timestamp='1461717778' post='3037141']
Paddle headstock neck.
-Is the headstock angled?
-Is the headstock lacquered?
-Tuner hole size? (closer to 14mm or 17mm)
-drilled or undrilled?
Cheers.
[/quote]

Angled: No.
Lacquered: Yes; one coat, I'd say.
Tuner hole size is a touch under 18mm.
Drilled.

I trimmed the corner where the board was damaged. I think this will sand out and be all but invisible - you can't play on that bit anyway.

Edited by alyctes
Link to comment
Share on other sites
  • 2 weeks later...
  • 3 weeks later...
  • 2 weeks later...
  • 2 weeks later...
Guest
This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...