Andytre Posted December 8, 2015 Share Posted December 8, 2015 Anyone had any experience with these? seem a very good price and could be useful for some of my Thomann Deko projects if there good quality. http://www.ebay.co.uk/itm/Quality-Maple-21-Fret-Neck-For-4-String-Jazz-Bass-Clear-Satin-Replacement-/361316499913?hash=item54202441c9:g:4ccAAOSwpDdVdJXB any advice info would be appreciated Quote Link to comment Share on other sites More sharing options...
mentalextra Posted December 10, 2015 Share Posted December 10, 2015 Hard to complain at those prices The usual complaint is of fret levelling and sharp edges on the frets but I think you'd have to be realistic and do some 'final finishing' yourself. I'd say worth a 'punt' Quote Link to comment Share on other sites More sharing options...
PlungerModerno Posted December 10, 2015 Share Posted December 10, 2015 Sounds like a reasonable deal - The big difference in practice will probably come down to quality control, support, and hardware. If you are prepared to fit the neck (tweaking neck pocket and/or heel), fix or replace it at your own expense if it breaks, clean up any unacceptable fretwork etc, fit your own tuners (including probably shimming or reaming the post holes) - It's not a bad idea at all. For a beater / backup bass it could be perfect. For something I'd need to be rock solid - I'd much prefer to save up for a higher end neck, preferably multi-laminate (e.g. Kubicki) or carbon graphite (e.g. status). Quote Link to comment Share on other sites More sharing options...
Andytre Posted December 11, 2015 Author Share Posted December 11, 2015 Ordered one yesterday, hopefully if the necks straight and not ramped and just needs fret work and set up it'll be a bargain! definitely wont be putting it on my main 2 basses but 'hopefully' will be great for little build projects and mucking about! ill report back when it arrives sometime in the next MONTH! i suppose that's what you get ordering form china, for a low price and with free postage! Quote Link to comment Share on other sites More sharing options...
Grangur Posted December 12, 2015 Share Posted December 12, 2015 [quote name='Andytre' timestamp='1449825369' post='2927126'] Ordered one yesterday, hopefully if the necks straight and not ramped and just needs fret work and set up it'll be a bargain! definitely wont be putting it on my main 2 basses but 'hopefully' will be great for little build projects and mucking about! ill report back when it arrives sometime in the next MONTH! i suppose that's what you get ordering form china, for a low price and with free postage! [/quote] Shenzhen is a nice place, if you're thinking of collecting. Quote Link to comment Share on other sites More sharing options...
alyctes Posted December 19, 2015 Share Posted December 19, 2015 I bought one or two a while back. One turned out to be too wide for what I wanted (too late to send back by the time I noticed). Quote Link to comment Share on other sites More sharing options...
mentalextra Posted December 21, 2015 Share Posted December 21, 2015 I've heard that the Chinese sellers are trying to raise their game and improve quality so I'd be interested to hear how this pans out? Quote Link to comment Share on other sites More sharing options...
mrn1989 Posted January 26, 2016 Share Posted January 26, 2016 Hi @Andytre Have you had it delivered yet, is it any good? Quote Link to comment Share on other sites More sharing options...
Andytre Posted January 30, 2016 Author Share Posted January 30, 2016 Still waiting on it to arrive delivery estimate was from Jan 19th to Feb 19th! On another point I bought a Ming on board preamp from China and that arrived in a week! When it's finally here I'll put up some pics and my thoughts Quote Link to comment Share on other sites More sharing options...
mrn1989 Posted January 30, 2016 Share Posted January 30, 2016 [quote name='Andytre' timestamp='1454155108' post='2966986'] Still waiting on it to arrive delivery estimate was from Jan 19th to Feb 19th! On another point I bought a Ming on board preamp from China and that arrived in a week! When it's finally here I'll put up some pics and my thoughts [/quote] Damn that sucks Ive just purchased on so I imagine il be waiting a while too. The preamp is good news though I look forward to an update Cheers Quote Link to comment Share on other sites More sharing options...
jimcroisdale Posted February 3, 2016 Share Posted February 3, 2016 Not had my hands on one yet, but I have been tempted by the various cheap necks on eBay - both guitar and bass. As many have suggested, I'm sure the machining will be okay, it's probably just the fret and nut finishing that will leave something to be desired. If you don't mind paying some attention to these areas yourself, these necks could be worth a look. That said, I bet they are hit and miss when it comes to the quality and straightness of the wood. Many will remain okay after manufacture and some will warp all over the place. If you could arrange to view before purchase that would be the best way, but looking at other similar auctions on eBay, even the ones that claim to be UK shippers are Chinese companies, so while the necks may actually be sat in a warehouse in the UK, you won't be able to go look at them and pick the best. Buyer beware and all that, but for £30, it's hardly the end of the world! Quote Link to comment Share on other sites More sharing options...
gelfin Posted February 6, 2016 Share Posted February 6, 2016 I recently bought this from ebay. http://www.ebay.co.uk/itm/NEW-20-FRET-ELECTRIC-BASS-NECK-J-MODEL-SKUNK-STRIPE-34-MAPLE-WITH-MAPLE-FB-/151922497747?_trksid=p2047675.l2557&ssPageName=STRK%3AMEBIDX%3AIT&nma=true&si=7iaxSS9jLoWeSuOORRl6qaZoLzE%253D&orig_cvip=true&rt=nc Arived quickly and well impressed with it. Nut slots needed filing to depth but that's all. Quote Link to comment Share on other sites More sharing options...
Andytre Posted February 15, 2016 Author Share Posted February 15, 2016 well after all this waiting for it to arrive the order was cancelled and i was refunded! typical! going to have to look for a different seller and try them out. i had my bitsa P all dismantled ready for it to arrive so a bit bummed out! i am expecting to do a bit of work when/if i ever get one delivered in the future but that's part of the fun isn't it! Quote Link to comment Share on other sites More sharing options...
mrn1989 Posted February 15, 2016 Share Posted February 15, 2016 (edited) [quote name='Andytre' timestamp='1455537465' post='2979906'] well after all this waiting for it to arrive the order was cancelled and i was refunded! typical! going to have to look for a different seller and try them out. i had my bitsa P all dismantled ready for it to arrive so a bit bummed out! i am expecting to do a bit of work when/if i ever get one delivered in the future but that's part of the fun isn't it! [/quote] Mine came on Saturday, and it is fantastic I haven't needed to level the frets and the truss rod works fine as long as your ok with the dark tint on the neck id say go for it. It took 3 weeks [url="http://www.ebay.co.uk/itm/121742782396?_trksid=p2060353.m1438.l2649&var=420738950681&ssPageName=STRK%3AMEBIDX%3AIT"]http://www.ebay.co.u...K%3AMEBIDX%3AIT[/url] [URL=http://s1272.photobucket.com/user/mikeoranage/media/12695039_10153978500409540_5291945552611819250_o_zpsnpjca1as.jpg.html][IMG]http://i1272.photobucket.com/albums/y382/mikeoranage/12695039_10153978500409540_5291945552611819250_o_zpsnpjca1as.jpg[/IMG][/URL] Edited February 15, 2016 by mrn1989 Quote Link to comment Share on other sites More sharing options...
Andytre Posted February 15, 2016 Author Share Posted February 15, 2016 Ordered! Cheers for the recommendation! How long did delivery take? Quote Link to comment Share on other sites More sharing options...
mrn1989 Posted February 15, 2016 Share Posted February 15, 2016 [quote name='Andytre' timestamp='1455565705' post='2980314'] Ordered! Cheers for the recommendation! How long did delivery take? [/quote] Great no probs. I ordered on 26th Jan and it arrived 13th Feb I'm just gonna order another now too Quote Link to comment Share on other sites More sharing options...
Andytre Posted February 24, 2016 Author Share Posted February 24, 2016 neck just arrived! it looks pretty damn good, the finish seems really nice, actually really like the dark tint, and frets seem fine to me, cant wait to get in and put it on a body!! delivery was also surprisingly fast at 10 days! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.