Jump to content
Why become a member? ×

Markbass CMD151P Jeff Berlin 1x15 Combo ** SOLD**
£530

bassgurumonster

By bassgurumonster,
in Amps and Cabs For Sale

 Share

Recommended Posts

bassgurumonster Explorer

bassgurumonster

Posted
Posted (edited)

##NOW £495##

Hello. Ive got this great combo for sale. Studio use only, fantastic condition. This is one of the italian made models. Heres some spec;


[b]FEATURES[/b][list]
[*]Designed by legendary bass soloist Jeff Berlin
[*]Built-in Little Mark II preamp
[*]Great power-to-weight ratio
[*]Made of high-grade, multi-ply poplar
[*]Glued, screwed, and sealed internally with special compounds for maximum sound quality
[*]Protected corners
[*]Side handles for transportation
[*]Lightweight
[/list]
[b]Little Mark II[/b][list]
[*]Provides 500W at 4 ohm or 300W at 8 ohm
[*]Gain and Master volume controls
[*]Clip warning light
[*]EQ includes controls for Low, Mid Frequency Low, High Frequency Low, and High
[/list]
[b]Little Mark II[/b][list]
[*]Provides 500W at 4 ohm or 300W at 8 ohm
[*]Gain and Master volume controls
[*]Clip warning light
[*]EQ includes controls for Low, Mid Frequency Low, High Frequency Low, and High
[*]VLE (Vintage Loudspeaker Emulator) and VPF (Variable Pre-shape Filter) filters
[*]Neutrik Speakon Combo out jacks for use with 1/4" or Speakon speaker cables
[*]Balanced XLR out
[*]Ground lift switch to eliminate hum
[*]Tuner out sends unbalanced signal sent to a tuner, amp or recording equipment not needing a balanced signal
[*]Send and Return Effect ensures main signal continues even if something dies in your effects chain
[*]Neutrik Speakon Combo out jacks for use with 1/4" or Speakon speaker cables
[*]Balanced XLR out
[*]Ground lift switch to eliminate hum
[*]Tuner out sends unbalanced signal sent to a tuner, amp or recording equipment not needing a balanced signal
[*]Send and Return Effect ensures main signal continues even if something dies in your effects chain
[/list]


[color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3][size=5][b]SPECIFICATIONS[/b][/size]
[size=4][b]CMD 151P Jeff Berlin Signature 300W 1x15 Bass Combo Amp[/b][/size][/size][/font][/color][list]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]Speaker: 1 x 15"[/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]Tweeter: none[/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]Bass reflex: rear[/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]Impedance: 8 ohms[/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]Sensitivity: 100 dB SPL[/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]Speaker power handling: 400W RMS (AES Standard)[/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]Amp output power: 500W at 4 ohm/300W at 8 ohm[/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]Frequency response: 40Hz to 5kHz[/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]Crossover Frequency: 3 kHz[/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]Dimensions: 18.27"W x 21.93"H x 18.9"D[/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]Weight: 46.74 lbs.[/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3][b]Little Mark II head[/b][/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3][b]Power[/b][/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]Input impedance: 500Kohm, max. voltage: 15 Vpp[/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]Balanced Output (XLR): 22Kohm, max. voltage 25 Vpp[/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]Effect Return impedance: 22Kohm, max. voltage: 25 Vpp[/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]Output Power: 300W RMS at 8 ohm, 500W RMS at 4 ohm[/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]Voltage is factory preset for the U.S.[/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3][b]Controls[/b][/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]GAIN —80 dB to +23 dB range[/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]MASTER VOLUME[/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]GROUND LIFT: switch on rear panel[/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3][b]Equalization[/b][/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]LOW[/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]Center frequency: 40Hz; level ±16dB[/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]LOW MID[/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]Center frequency 360Hz, level ±16dB[/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]HIGH MID[/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]Center frequency 800Hz, level ±16dB[/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]HIGH[/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]10kHz shelf; level ±16dB[/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]VPF (Variable Pre-shape Filter)[/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]center frequency 380Hz (cut)[/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]VLE (Vintage Loudspeaker Emulator)[/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]frequency range 250Hz—20kHz (cut)[/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3][b]Outputs[/b][/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]EFFECT SEND[/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]Unbalanced, max. voltage 20 Vpp (pre-EQ)[/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]TUNER OUT[/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]Unbalanced, max. voltage 25 Vpp[/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]LINE OUT[/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]Balanced XLR, max. voltage 10 Vpp[/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]SPEAKER OUT[/size][/font][/color]
[*][color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]Speakon, 1/4"[/size][/font][/color]
[/list]
[color=#000000][font=Arial, Calibri, Helvetica, sans-serif][size=3]Also comes with a Roqsolid cover and mains lead. Its priced to be collected from Hull. East Yorkshire.

Il load up some pics the next few days.

Many thanks[/size][/font][/color]

Edited by bassgurumonster
Guest
This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...