Jump to content
Why become a member? ×

None flashing budget stage lights


bonzodog
 Share

Recommended Posts

Went to Ikea recently and bought my daughter two very cheap table lamps. You put a white LED bulb in and a coloured plastic cover lamp shade shaped goes over the top and they are about 6 inches high. They were £2.50 each and I bought her a red and a blue one. Total cost with LED bulbs £12.00

I got home and put them either side of her bedroom and they looked really effective with the red and blue mixing well. It then got me thinking. Her bedroom is roughly the size of most spaces we get at pub gigs where currently we use LED par cans that cost £250.
I don't really like lights flashing too much so if we used these table lamps on constant I think they would look effective. We could always place them behind speakers if having table lamps on stage looked odd.

May give it a try at gig tonight

Link to comment
Share on other sites

[quote name='bonzodog' timestamp='1455991869' post='2984398']
Went to Ikea recently and bought my daughter two very cheap table lamps. You put a white LED bulb in and a coloured plastic cover lamp shade shaped goes over the top and they are about 6 inches high. They were £2.50 each and I bought her a red and a blue one. Total cost with LED bulbs £12.00

I got home and put them either side of her bedroom and they looked really effective with the red and blue mixing well. It then got me thinking. Her bedroom is roughly the size of most spaces we get at pub gigs where currently we use LED par cans that cost £250.
I don't really like lights flashing too much so if we used these table lamps on constant I think they would look effective. We could always place them behind speakers if having table lamps on stage looked odd.

May give it a try at gig tonight
[/quote]

Worth a pop.
At Slade gigs in days of yore Dave Hill & Jimmy Lea used to have wooden steps knocked together by a roadie, like a big L shaped box about 2ft wide and 4 ft hight, just two steps. The top was thick perspex for them to stand on and inside was just a car headlight pointing up. Very effective.

edit: Maybe fixed them onto wider bases for less chance of them being knocked over and of course watch the wiring safety.

Edited by Big_Stu
Link to comment
Share on other sites

I always thought that, in pub world, uplighting is a much more effective way of lighting the band rather than attempting to downlight where there's low ceilings.

Often it's much more cost effective too; a couple of well placed par cans either side of the drum kit and behind the backline looks great and doesn't get in anyone's eyes.

Link to comment
Share on other sites

[quote name='TimR' timestamp='1456004284' post='2984532']
It's amazing what you can build with a bit of imagination.

Before the days of LED I built some light boxes. Painted the boxes black and fitted 240v standard ceiling lamp holders and coloured bulbs.

Tilt towards the band and no one is any the wiser.
[/quote]


I used to use a pair of kitchen lights, the round type with three individually angled spotlights. Put different coloured bulbs in them and a length of cable with a three pin plug. One either side of the stage, one colour aimed across the floor, one colour aimed at the ceiling and the other at the drum kit, looked really good all for about thirty quid.
Was ok until a drunk bloke fell over and put his hand on top of the bulbs to help himself up, the bits of skin left on the bulbs smelt horrible :D not that problem with LEDs nowadays.

Link to comment
Share on other sites

[quote name='Maude' timestamp='1456075953' post='2985155']



I used to use a pair of kitchen lights, the round type with three individually angled spotlights. Put different coloured bulbs in them and a length of cable with a three pin plug. One either side of the stage, one colour aimed across the floor, one colour aimed at the ceiling and the other at the drum kit, looked really good all for about thirty quid.
Was ok until a drunk bloke fell over and put his hand on top of the bulbs to help himself up, the bits of skin left on the bulbs smelt horrible :D not that problem with LEDs nowadays.
[/quote]

Yes. I did get a bit jumpy at some gigs. Always worried about using 'homemade' gear. Wondering about getting it PAT tested and whether it's covered under PLI.

Link to comment
Share on other sites

[quote name='colgraff' timestamp='1456078468' post='2985182']
Re LED heat. I love that LEDs give off virtually no heat. As I get older, I appreciate cooler stages. Having said that, it took me a little time to remember not to look directly at an LED light. Going temporarily blind adds an entertainingly random element to my playing.
[/quote]

I used to have some colour bars that were incredibly bright. I try to get them as high up as possible.

I plugged a leaser in once and then pushed the stand up while it was on. Got a face full of laser effects as it went past. Thought I'd done irreparable damage to my eyes!

Link to comment
Share on other sites

[url="http://www.maplin.co.uk/p/6-way-pod-light-n17dz"]http://www.maplin.co.uk/p/6-way-pod-light-n17dz[/url]
[color=#606063]"Light pods detach to form various arrangements"[/color]

[color=#606063]I had similar from Tandy years ago and it had a constant light function too.[/color]

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...