ahpook Posted September 24, 2008 Share Posted September 24, 2008 ok....let's get the "ahems" and "oo-errr missus" out the way first ok...here's the problem. i bought a westone from dangerboy a while back and as ti didn't have a nut, stuck one on without much thought, but now i notice that the intonation is off on the first few frets, and i'm guessing this may be down to the nut being the wrong height. anyone confirm that this might be the cause ? and how do you work out the correct height for a nut ? Quote Link to comment Share on other sites More sharing options...
Mr. Foxen Posted September 24, 2008 Share Posted September 24, 2008 Cut the slots deeper or grind down the bottom of the nut to lower it. If you go too far it will rattle, but you can put a thin bit of plasitc under as a shim. Quote Link to comment Share on other sites More sharing options...
ahpook Posted September 24, 2008 Author Share Posted September 24, 2008 [quote name='Mr. Foxen' post='291367' date='Sep 24 2008, 11:51 PM']Cut the slots deeper or grind down the bottom of the nut to lower it. If you go too far it will rattle, but you can put a thin bit of plasitc under as a shim.[/quote] there's a shim in there already, as it was world of buzz when i tried it without... so a wee bit of trial and error is the best way...? Quote Link to comment Share on other sites More sharing options...
OldG Posted September 25, 2008 Share Posted September 25, 2008 I use this method: Starting on the E string, fret on the 3rd - (as if playing a G) then tap on the string over the top of the metal of the 1st fret. If the nut is about right you should just feel and maybe hear a click indicating a small clearance... If the gap is too big, lower the nut/slot - no clearance raise the nut/slot. I've set guitars and basses like this for years now , seems to work well for me Quote Link to comment Share on other sites More sharing options...
escholl Posted September 25, 2008 Share Posted September 25, 2008 [quote name='OldG' post='291425' date='Sep 25 2008, 07:00 AM']I use this method: Starting on the E string, fret on the 3rd - (as if playing a G) then tap on the string over the top of the metal of the 1st fret. If the nut is about right you should just feel and maybe hear a click indicating a small clearance... If the gap is too big, lower the nut/slot - no clearance raise the nut/slot. I've set guitars and basses like this for years now , seems to work well for me [/quote] +1, i also do this and it works very well, haven't had any problems. Quote Link to comment Share on other sites More sharing options...
The Burpster Posted September 25, 2008 Share Posted September 25, 2008 The tapping noise ^^^ on the 1st fret should equate to about .005" which is about right, unless you attack your strings with a Patriot missile as a plectrum in which case .005-010" is in order! If you read Dan Erlewines way it is much more complex but ends up about teh same as teh above short cut method (which I use too!) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.