SOLD Demeter Minnie VTBP-800-D inc padded carry bag £750

[warwickhunt]

[url="http://s54.photobucket.com/user/warwickhunt/media/Demeter%20MB1_zpsm9r5zung.jpg.html"][/url]

[url="http://s54.photobucket.com/user/warwickhunt/media/Demeter%20back_zpse26y67nj.jpg.html"][/url]

[url="http://s54.photobucket.com/user/warwickhunt/media/Demeter%20valves_zpscw952js5.jpg.html"][/url]

[color=#141823][font=helvetica, arial, sans-serif]Demeter Minnie VTBP-800-D [/font][/color]
[color=#141823][font=helvetica, arial, sans-serif]Too many amps and not enough time... [/font][/color]
[color=#141823][font=helvetica, arial, sans-serif]Mint, as new condition with a padded carry bag. Superb tone and based on Leland Sklar's Demeter preamp with a valve preamp and lightweight 800w class D power section (weighs 10lb). I've (finally) decided I'm going to stick with my Thunderfunk 750 amp... for now! [/font][/color]

[b][size=5][color=#141823][font=helvetica, arial, sans-serif]Spec.[/font][/color][/size]
[color=#141823][font=helvetica, arial, sans-serif]Tone section:[/font][/color][/b]
[color=#141823][font=helvetica, arial, sans-serif][b]Treble Control:[/b] The treble control gives 6 dB of boost or cut at 4 kHz (6dB per octave, shelving type).[/font][/color]
[color=#141823][font=helvetica, arial, sans-serif][b]Middle Control:[/b] The middle give 6dB of boost or cut at 500Hz (wide Q, peaking type).Bass Control: The bass control gives 9dB of boost or cut at a selectable frequency of 60Hz or 120Hz (6dB per octave, shelving type).[/font][/color]
[color=#141823][font=helvetica, arial, sans-serif][b]Presence Control:[/b] The presence control gives up to 12dB of boost at a selectable frequency of 2kHz or 4kHz (active type, 6dB per octave).[/font][/color]
[color=#141823][font=helvetica, arial, sans-serif][b]Mode switch:[/b] Dark, is a high frequency cut fatting up your fundmental. Normal, flat opertion showing off more overtones. Bright, brings out the overtones on the dullest basses or speakers.[/font][/color]
[color=#141823][font=helvetica, arial, sans-serif][b]Internal Volume Trimmer:[/b] This control is designed to match the output volume of the VTBP-M-800D with the sensitivity of any Bass.[/font][/color]
[color=#141823][font=helvetica, arial, sans-serif][b]Effects Loop:[/b] in/out line level[/font][/color]
[color=#141823][font=helvetica, arial, sans-serif][b]Power Amp Outputs:[/b] Operating at 4 (800w), 8 (500w) or 16 ohm (250w). 1/4” & Speakon[/font][/color]
[b][color=#141823][font=helvetica, arial, sans-serif]Preamp Specifications[/font][/color][/b]
[color=#141823][font=helvetica, arial, sans-serif][b]Inputs:[/b] one instrument level 1/4” jack.[/font][/color]
[color=#141823][font=helvetica, arial, sans-serif][b]Output impedance (line):[/b] > 1 kohm, (unbalanced)[/font][/color]
[color=#141823][font=helvetica, arial, sans-serif][b]Minimum load impedance:[/b] 10K[/font][/color]
[color=#141823][font=helvetica, arial, sans-serif][b]Input impedance:[/b] > 1megohm[/font][/color]
[color=#141823][font=helvetica, arial, sans-serif][b]Maximum output:[/b] + 24dBV[/font][/color]
[color=#141823][font=helvetica, arial, sans-serif][b]EQ gain:[/b] + or – 12 dB[/font][/color]
[color=#141823][font=helvetica, arial, sans-serif][b]Signal to noise ratio:[/b] – 80dB[/font][/color]
[color=#141823][font=helvetica, arial, sans-serif][b]THD:[/b] .5%[/font][/color]
[color=#141823][font=helvetica, arial, sans-serif][b]Outputs (preamp):[/b] 1/4” unbalanced , Optional 3 pin XLR Direct out[/font][/color]
[color=#141823][font=helvetica, arial, sans-serif][b]Frequency response:[/b] 10Hz to 40kHz[/font][/color]
[color=#141823][font=helvetica, arial, sans-serif][b]Tube:[/b] 1-12AX7a selected 1-12AT7[/font][/color]
[color=#141823][font=helvetica, arial, sans-serif][b]Operating voltage:[/b] 115V or 230V AC[/font][/color]
[color=#141823][font=helvetica, arial, sans-serif][b]Filament:[/b] 6.3 V DC[/font][/color]
[size=4][b][color=#141823][font=helvetica, arial, sans-serif]Power Amp Specifications[/font][/color][/b][/size]
[color=#141823][font=helvetica, arial, sans-serif][b]Outputs (power amp):[/b] 1/4” Speaker & Speakon[/font][/color]
[color=#141823][font=helvetica, arial, sans-serif][b]Output impedance (power amp):[/b] 4 ohm, 8 ohm, 16 ohm[/font][/color]
[color=#141823][font=helvetica, arial, sans-serif][b]Output Power (power amp):[/b] 800 watt RMS @ 4 ohms, 400 watt RMS @ 8 ohms[/font][/color]

[color=#141823][font=helvetica, arial, sans-serif]I would take a trade (always interested in trying new toys) BUT interested parties have to be realistic about respective values; if your bass/amp/cab regularly sells on BC for 'xyz' amount I'm not going to be giving you +50% of that figure... does that seem fair? [/font][/color]
[color=#141823][font=helvetica, arial, sans-serif]I'm always interested in old or Ltd Ed Warwick basses, esoteric quality amps [/font][/color][color=#141823][font=helvetica, arial, sans-serif](i.e. not Ashdown/Peavey etc.)[/font][/color][color=#141823][font=helvetica, arial, sans-serif] that I've maybe not owned yet, top quality cabs, Roadworn series P bass, light-weight Musicman Sterling or other interesting basses. [/font][/color]
[color=#282828][font=helvetica, arial, sans-serif]Based in the NE but willing to ship at cost in the UK/Europe. Cash on collection or bank transfer not paypal. [/font][/color]

Edited April 4, 2016 by warwickhunt

[Bearfist]

Oh hello!

Been thinking about one of these lately, il be more than a bit tempted if any of the stuff i have up sells and this is still here...

[warwickhunt]

[quote name='Bearfist' timestamp='1459416930' post='3016267']
Been thinking about one of these lately, il be more than a bit tempted if any of the stuff i have up sells and this is still here...
[/quote]

Just give me a shout if you want info/details.

[warwickhunt]

On hold pending.