rainbowreality Posted April 3, 2016 Share Posted April 3, 2016 (edited) Hello there, I've been looking for the wiring diagram for my Indonesian made tribute. Apparently the wiring differs from the USA made L2000's. I need one because one of the wires from the series/parallel switch has come away and I've no idea where it goes! I've looked everywhere with not much luck, can anyone kindly assist? Edited April 3, 2016 by rainbowreality Quote Link to comment Share on other sites More sharing options...
ikay Posted April 3, 2016 Share Posted April 3, 2016 (edited) Can you post a pic showing the loose wire? The attached pic may help Edited April 3, 2016 by ikay Quote Link to comment Share on other sites More sharing options...
rainbowreality Posted April 3, 2016 Author Share Posted April 3, 2016 Hi Ikay, cherers for your reply. I've tried taking a couple of pictures of the wiring, It's pretty messy in there. Looking closely it looks like they've not done the best job of soldering in the factory! Quote Link to comment Share on other sites More sharing options...
rainbowreality Posted April 3, 2016 Author Share Posted April 3, 2016 And a couple of more Quote Link to comment Share on other sites More sharing options...
neepheid Posted April 3, 2016 Share Posted April 3, 2016 (edited) Does this lovely diagram from bassesbyleo.com help (click on the image for a pdf for easier reading)? [url="http://www.bassesbyleo.com/images/g&l_tech/l-2000/l2k_wiring_diagram.pdf"][/url] The only differences in the wiring Tribute vs. USA are the different pots, the physical orientation of the switches and the lack of little terminal brackets to wire earths to on the pots. The USA L-2000s since about 2006 do not have OMG mode capacitors, but that was a difference if you're comparing a pre 2006 USA with a Tribute. If you want to go even further then this document goes into some detail on the switch, as well as some cool mods (I got the 4PDT on-on-on switch and wired mine parallel, single coil (inner), series) [url="http://www.ifb.co.uk/~matthew/GL_Wiring.doc"]http://www.ifb.co.uk...w/GL_Wiring.doc[/url] Hope that helps. Edited April 3, 2016 by neepheid Quote Link to comment Share on other sites More sharing options...
rainbowreality Posted April 3, 2016 Author Share Posted April 3, 2016 Cheers Neepheid!I had seen that schematic but wasn't sure if it applied to tributes so thanks for clarifying that. I was going to attempt the repair myself but seeing how messy it his inside I'm kinda hovering whether to take it to a engineer instead especially as the toggle switches aren't standard so I wouldn't want to screw it up! Quote Link to comment Share on other sites More sharing options...
ikay Posted April 3, 2016 Share Posted April 3, 2016 (edited) Jeez that spaghetti of wiring is shocking! Edited April 3, 2016 by ikay Quote Link to comment Share on other sites More sharing options...
rainbowreality Posted April 3, 2016 Author Share Posted April 3, 2016 [quote name='ikay' timestamp='1459717337' post='3018987'] Jeez that spaghetti of wiring is shocking! [/quote] Tell me about it! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.