NoirBass Posted April 19, 2016 Share Posted April 19, 2016 (edited) [b]SOLD [s]Seymour Duncan SPB-3 Quarter Pounder pups[/s][/b] [s]Came out of a bass I bought that I managed to source the original pickups for. Kept it for a while as I have one in another bass and really liked it, and imagined I'd install it in something at some point. Has sat there since and isn't going to get used so off it goes. £35 posted in the UK[/s] [b]SOLD [/b][s][b]EMG P set split pickup with loom[/b] These are the older style EMG's. I bought them a while back with a view to popping them in a CV P bass, turns out I quite liked the sound of the original PU's and these were never installed. They came to me without a loom and after a bit of research I managed to put one together using Alpha pots. Its all been tested and you can simply pull out your old guts and install these without any soldering. Its usually possible to fit the 9V battery under the pickguard without any routing too, although I would have a good measure first. £50 posted[/s] [b]Unidentified bridge J PUP[/b] Alleged to be a Kent Armstrong, but I have no way of identifying it (maybe someone can help?) came out of a P/J bass in the bridge position. Sounds like a rear J PUP (unsurprisingly!) [s]£13[/s] £10 Posted - please make me an offer, I want this gone! Edited November 6, 2017 by NoirBass Link to comment Share on other sites More sharing options...
NoirBass Posted April 24, 2016 Author Share Posted April 24, 2016 Sunday Bump Link to comment Share on other sites More sharing options...
NoirBass Posted June 20, 2016 Author Share Posted June 20, 2016 Bump - just remembered these. Link to comment Share on other sites More sharing options...
NoirBass Posted September 28, 2016 Author Share Posted September 28, 2016 Remembered it again, BUMP Link to comment Share on other sites More sharing options...
NoirBass Posted March 5, 2017 Author Share Posted March 5, 2017 Bump this up as I'd just remembered it again, please hit me with near offers. Link to comment Share on other sites More sharing options...
NoirBass Posted March 7, 2017 Author Share Posted March 7, 2017 Bump as I've sold the EMG. someone make me an offer on the remaining J PUP - I'll probably take it . Link to comment Share on other sites More sharing options...
NoirBass Posted March 16, 2017 Author Share Posted March 16, 2017 Price Drop and title rename, if you need a rear J pickup for a project, let me know I'm sure we can work something out. Link to comment Share on other sites More sharing options...
Grangur Posted April 10, 2017 Share Posted April 10, 2017 Forgotten again? Link to comment Share on other sites More sharing options...
NoirBass Posted April 10, 2017 Author Share Posted April 10, 2017 Ha, yeah. - as much as I'd like this gone it's low on my list of priorities.😊 Link to comment Share on other sites More sharing options...
NoirBass Posted November 5, 2017 Author Share Posted November 5, 2017 Found this looking for my other sale posts. BUMP Link to comment Share on other sites More sharing options...
roman_sub Posted November 5, 2017 Share Posted November 5, 2017 Can you measure the DC resistance of the bridge pickup please? Link to comment Share on other sites More sharing options...
NoirBass Posted November 6, 2017 Author Share Posted November 6, 2017 [quote name='roman_sub' timestamp='1509921615' post='3402683'] Can you measure the DC resistance of the bridge pickup please? [/quote] I could if I knew how 😀 Link to comment Share on other sites More sharing options...
roman_sub Posted November 6, 2017 Share Posted November 6, 2017 [quote name='NoirBass' timestamp='1509956143' post='3402776'] I could if I knew how [/quote] take a multimeter, set to 200k or 20k Ohm setting, and put the tips to each of the two wires coming out of the pickup, measure Link to comment Share on other sites More sharing options...
NoirBass Posted November 6, 2017 Author Share Posted November 6, 2017 [quote name='roman_sub' timestamp='1509973967' post='3402935'] take a multimeter, set to 200k or 20k Ohm setting, and put the tips to each of the two wires coming out of the pickup, measure [/quote] That is very useful, thanks. Unfortunately I’m the meantime the pickup has Sold. Thanks for your knowledge and interest. Link to comment Share on other sites More sharing options...
Recommended Posts