FuNkShUi Posted May 18, 2016 Share Posted May 18, 2016 (edited) Ok, i'm probably not going to describe this very well so bare with me.... So i do acoustic guitar shows, where i use the TC Electronic ditto 2 looper. All is well. Great pedal. Does what i need. I was thinking about how could i possibly use more than one instrument into it, other than actually switching leads in and out? So for example say i wanted to layer vocal harmonies, electric guitar, acoustic guitar and bass.... But there's only one Stereo input....... So is it a case of having to switch each out, or is there a better way? I'm thinking a bank of inputs, where each channel can be individually muted, and connect to the pedal through a single 1/4" jack? Orrrrr.... is there a far more elegant solution that i'm not thinking about? Edit to say if this should go somewhere else i'm more than happy for it to be moved Edited May 18, 2016 by FuNkShUi Link to comment Share on other sites More sharing options...
mike257 Posted December 1, 2016 Share Posted December 1, 2016 There's plenty of pedals around that will switch between inputs - the Boss LS-2 is oft-spotted, Lehle make various clever switchy things, Bright Onion almost certainly build them and could do a custom spec pretty cheaply, and there's plenty more out there. Link to comment Share on other sites More sharing options...
JapanAxe Posted January 8, 2017 Share Posted January 8, 2017 You mean like this? [media]http://youtu.be/FGT0A2Hz-uk[/media] Link to comment Share on other sites More sharing options...
Roo Hobbers Posted January 8, 2017 Share Posted January 8, 2017 This might be what you're looking for... http://www.richtonemusic.co.uk/products/fender_2_switch_aby_pedal.asp?gclid=CjwKEAiA48fDBRDJ24_imejhwUkSJAAr0M5kFKo54dOBZ3UCnCIBa6RzsXM0zA2xeEWxxUwv8re63BoC_Vjw_wcB Link to comment Share on other sites More sharing options...
pete.young Posted January 10, 2017 Share Posted January 10, 2017 Or maybe a small mixer with channel mute switches? Link to comment Share on other sites More sharing options...
fiatcoupe432 Posted January 24, 2017 Share Posted January 24, 2017 . [quote name='Roo Hobbers' tmestamp='1483915985' post='3211164'] This might be what you're looking for... [url="http://www.richtonemusic.co.uk/products/fender_2_switch_aby_pedal.asp?gclid=CjwKEAiA48fDBRDJ24_imejhwUkSJAAr0M5kFKo54dOBZ3UCnCIBa6RzsXM0zA2xeEWxxUwv8re63BoC_Vjw_wcB"]http://www.richtonem...re63BoC_Vjw_wcB[/url] [/quote][quote name='Roo Hobbers' timestamp='1483915985' post='3211164'] This might be what you're looking for... [url="http://www.richtonemusic.co.uk/products/fender_2_switch_aby_pedal.asp?gclid=CjwKEAiA48fDBRDJ24_imejhwUkSJAAr0M5kFKo54dOBZ3UCnCIBa6RzsXM0zA2xeEWxxUwv8re63BoC_Vjw_wcB"]http://www.richtonem...re63BoC_Vjw_wcB[/url] [/quote] this is interesting as im looking into something like that too ..... i think this does not resolve the issue as all i could find is that the ABY has one input and 2 output . i think that what is needed is something with more input and one output which can be send into the looper input and then on the amp. Link to comment Share on other sites More sharing options...
pete.young Posted February 2, 2017 Share Posted February 2, 2017 [quote name='fiatcoupe432' timestamp='1485291405' post='3222893'] . this is interesting as im looking into something like that too ..... i think this does not resolve the issue as all i could find is that the ABY has one input and 2 output . i think that what is needed is something with more input and one output which can be send into the looper input and then on the amp. [/quote] The AB/Y pedal can also be used with two inputs and one input. Where it's likely to fall down is the need to balance the signal strength of the inputs, particularly if you want to use it with a microphone and an instrument. Link to comment Share on other sites More sharing options...
.jpg.7e18f76540598a8efc0e6ca9be453059.jpg)
Recommended Posts