Jump to content
Why become a member? ×

Crazy Horses keyboard part


lushuk
 Share

Recommended Posts

Looking at the specs there's not a lot of synths with ribbon controllers on them that have the same 3 octave range as the one on the YC-30.

However I imagine that it's one of those sounds that is very easy to get with the right instrument. If you have an actual Yamaha YC-30 you can probably switch it on and it will be right there. IIRC there was a television interview with The Osmonds where Donny demonstrated exactly how that sound is done. I would be very surprised if someone hasn't already uploaded it to YouTube.

Link to comment
Share on other sites

[quote name='Woodinblack' timestamp='1465320307' post='3067117']
We do this with just a guitar. But I have thought of using a synth and a pedalboard.



Why do you leave the 'Take a good look around' bit?
[/quote]

No one can sing it properly. :(

Link to comment
Share on other sites

[quote name='lushuk' timestamp='1465492829' post='3068772']
That would be awesome, thank you

On another note (no pun.....) i couldn't find the interview with Donny on how he played it, maybe there somewhere :( lets see what the Moog can do!
[/quote]

The interview was back when the single was released so a long time ago and so my memory is fairly hazy as to how it actually functioned, but it appeared that the ribbon controller was doing all the work, and I don't recall him playing any actual notes on the keyboard at the same time although I could well be wrong on that matter. What was obvious was the he was using the full length of the ribbon controller which according to the info I could find about the keyboard is a 3 octave range. The only ribbon controller I've actually used is the one on the Yamaha KX5 which is up to 1 octave each way (2 in total) and has a dead spot in the centre to make it more user friendly for pitch bending, but would completely ruin the effect you need for the Crazy Horses sound.

Link to comment
Share on other sites

[quote name='BigRedX' timestamp='1465493358' post='3068778']
The interview was back when the single was released so a long time ago and so my memory is fairly hazy as to how it actually functioned, but it appeared that the ribbon controller was doing all the work, and I don't recall him playing any actual notes on the keyboard at the same time although I could well be wrong on that matter. What was obvious was the he was using the full length of the ribbon controller which according to the info I could find about the keyboard is a 3 octave range. The only ribbon controller I've actually used is the one on the Yamaha KX5 which is up to 1 octave each way (2 in total) and has a dead spot in the centre to make it more user friendly for pitch bending, but would completely ruin the effect you need for the Crazy Horses sound.
[/quote]

mmmm found some 70's stuff but mostly girls screaming lol

Thanks for the audio clip I've seen/heard it before but may mix it into the intro if i can get one! :)

Link to comment
Share on other sites

Well, had a short fiddle around with what was there tonight, and after a few minutes with the ribbon controller, I couldn't get it to do the right thing, but the animoog keyboard is good for adding the tremolo.

[url="https://www.youtube.com/embed/THcVacf3i9o"]http://www.youtube....bed/THcVacf3i9o[/url]

Not perfect, but it is a start

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...