Grangur Posted June 12, 2016 Share Posted June 12, 2016 (edited) Hi there, here's a body from a project I've been trying to get to work on for a while. I believe it's paulownia wood and finished in a good coat of lacquer, or nitro. The pocket is suitable for a Fender type neck. The electrics work, but I'd replace them. The bridge is solid enough for a BBOT. There are a few small dings for a realistic roadworn look, but if you want relic you've still got a long way to go. I'm based in East Herts, but I can post this to you. If you'd like more info or pics, please ask. Edited June 13, 2016 by Grangur Link to comment Share on other sites More sharing options...
lownote Posted June 12, 2016 Share Posted June 12, 2016 Rich, would a Squier Affinity P bass neck from the 90s fit? Link to comment Share on other sites More sharing options...
Grangur Posted June 12, 2016 Author Share Posted June 12, 2016 [quote name='lownote12' timestamp='1465764099' post='3070851'] Rich, would a Squier Affinity P bass neck from the 90s fit? [/quote] Heya mate. Yes, I believe that it would. If you wish, you can draw round the neck on a piece of paper, send it to me and I'll check it out for you. If it's not right, it won't be far out. Link to comment Share on other sites More sharing options...
alyctes Posted June 12, 2016 Share Posted June 12, 2016 If it helps, it does look very much like a paulownia body I had. Mine was very light, and decently made. GLWTS Link to comment Share on other sites More sharing options...
Recommended Posts