tayste_2000 Posted June 17, 2011 Share Posted June 17, 2011 TBH I've not messed with it much but Garageband and Amplitube but you'll need an adaptor as well. I personally like Amplitube the most as a bass practice tool as the Ampeg sim is a really nice tone. Quote Link to comment Share on other sites More sharing options...
Gunsfreddy2003 Posted June 17, 2011 Share Posted June 17, 2011 Yeah I use Amplitube 3 on my MacBook but can't seem to get any drum loops into it like I can with Garageband. The Ampeg envelope filter in the Custom Shop is awesome though!! [quote name='tayste_2000' post='1272556' date='Jun 17 2011, 11:22 AM']TBH I've not messed with it much but Garageband and Amplitube but you'll need an adaptor as well. I personally like Amplitube the most as a bass practice tool as the Ampeg sim is a really nice tone.[/quote] Quote Link to comment Share on other sites More sharing options...
pantherairsoft Posted June 19, 2011 Share Posted June 19, 2011 [quote name='Higgie' post='1272314' date='Jun 17 2011, 01:21 AM']Awesome setup dude.[/quote] Agreed! Setups done get much more 'boutique' than that! Quote Link to comment Share on other sites More sharing options...
paul_5 Posted June 19, 2011 Share Posted June 19, 2011 (edited) Here's my little lot. [attachment=83106:P6190696.JPG] Signal path goes is: Looper - OC2 - EHX Bass MS - EBS Chorus - MXR Bass Fuzz - EBS TremoLo - 3 leaf Groove regulator - back to looper - Master output to MXR Bass DI+. Silica Gel optional. Edited June 20, 2011 by paul_5 Quote Link to comment Share on other sites More sharing options...
pantherairsoft Posted June 20, 2011 Share Posted June 20, 2011 Folks - Ideas for 'slanting' my massive pedalboard. I use a diago tourman and need to use something to place under the back of the board so it slopes up slightly. Sounds simple, but ti much be something that a heavy board won't slide off on a solid stage floor when I push against the pedals at the back where its raised. Must also be something that will fit in a bag with my stuff, so a number of small wedges maybe? Shep Quote Link to comment Share on other sites More sharing options...
xgsjx Posted June 20, 2011 Share Posted June 20, 2011 How about something like this? [url="http://www.fotosense.co.uk/gitzo-g1220-130b3-all-terrain-foot-60mm-set-of-3.html"]Linky[/url] You'd need to fit 3 nuts for them to screw into along the edge of your board (1 each end & one 1/2 way along would be the preferred option). There's other things on that website that will do the same job such as [url="http://www.fotosense.co.uk/gitzo-gs5030vsf-photo-video-double-use-spike-rubber-feet-set-of-3.html"]these.[/url] Might be a easier option as you would just need to drill 3 holes, pop a bolt through with a nut & a couple of washers & enough bolt past the nut to screw these on to. But there'd be a bit of bolt sticking out to catch onto things Quote Link to comment Share on other sites More sharing options...
pantherairsoft Posted June 20, 2011 Share Posted June 20, 2011 They look good, and if I'm lucky may fit on the holes/on the bolts used by the existing small rubber feet! Expensive though... Quote Link to comment Share on other sites More sharing options...
xgsjx Posted June 20, 2011 Share Posted June 20, 2011 They are a bit pricey & I'm sure there's cheaper alternatives. How about the feet that they use on kick drum stabilisers? They're similar & much cheaper. Quote Link to comment Share on other sites More sharing options...
pantherairsoft Posted June 21, 2011 Share Posted June 21, 2011 I'm sure on the 'pin' based feet. There's seriou weight in the board (more than my 212 cab) plus with my body weight on it I'll be concerned about damage to the floor/studio carpet. The flat feet in the link above are cool. Was thinking about those ISO tilt blocks you can buy for amps as well... Obviously for the tilt as opposed to the isolation properties! Quote Link to comment Share on other sites More sharing options...
mcgraham Posted June 21, 2011 Share Posted June 21, 2011 Shep, or anyone else with a massive board, have you ever thought about something like Bryan R. Tyler's pedalboard arrangement? [url="http://www.bryanrtylermusic.com/effectpedaldemos2.html"]Vids here that show the setup.[/url] It seems to be a 'two-tier' type affair, but differs from other two-tier pedal boards in that the upper tier is angled such that the plane of the upper tier is in line with your vision (great for rack effects). From the side on it would look like a '>' sign Some upclose pics I've seen of it also show that he has pedals velcro'd or ziptied to the underside of that tier - obviously not possible to stomp on those ones but I believe he uses the Musicom EFX labs switcher to control those. It's a very dense solution and would possibly add more weight to some boards rather than reduce the weight, but it would certainly reduce pedalboard footprint and could potentially make for a more 'wieldy' pedalboard when packed up, i.e. cuboidal rather than massively long, wide and flat. Incidentally, I'm contemplating the possibility of something similar but so as to provide a dock for my laptop plus some kind of controller to allow me to operate certain functions (e.g. samples, etc) that way I've got everything setup for easy use. Still a random idea at present and may not materialise as such. Quote Link to comment Share on other sites More sharing options...
mcgraham Posted June 21, 2011 Share Posted June 21, 2011 Found a pic: Quote Link to comment Share on other sites More sharing options...
cheddatom Posted June 22, 2011 Share Posted June 22, 2011 (edited) My guitarist has the same board, but never bought rack effects, so he just uses that section to cram in his wah, volume pedal, and cables. Shep - would rubber doorstops be no good? Edited June 22, 2011 by cheddatom Quote Link to comment Share on other sites More sharing options...
pantherairsoft Posted June 22, 2011 Share Posted June 22, 2011 Interesting pedal board!? The Diago has small rubber feet already. Door stops may work but I want a reasonable angle on it. Takao the back by an inch I doubt will do anything noticeable. Quote Link to comment Share on other sites More sharing options...
cheddatom Posted June 22, 2011 Share Posted June 22, 2011 you can get some big chunky rubber door stops though I think if you're going to put anything under the back, you'd have to put a strip of rubber under the front to stop it slipping. In fact, if you did that, you could use pretty much anything to go under the back. I always thought it'd be nice to have a wedge shaped board, with a wedge shaped lid which would fold underneath to create the riser. Quote Link to comment Share on other sites More sharing options...
Hultberg Posted June 22, 2011 Share Posted June 22, 2011 [url="http://postimage.org/image/36pahjpic/"][/url] [url="http://postimage.org/image/36oywsa1w/"][/url] [url="http://postimage.org/image/36p3vebj8/"][/url] Quote Link to comment Share on other sites More sharing options...
dudewheresmybass Posted June 22, 2011 Author Share Posted June 22, 2011 that's a lot of ampeg-ish-ness there! Quote Link to comment Share on other sites More sharing options...
Finbar Posted June 22, 2011 Share Posted June 22, 2011 Me and our guitarist both used to have pretty full Tourmans. We ended up taking two long sections of 2x4 to every gig, and just slipped them under the back edge. Hah. [quote name='pantherairsoft' post='1276192' date='Jun 20 2011, 06:43 PM']Folks - Ideas for 'slanting' my massive pedalboard. I use a diago tourman and need to use something to place under the back of the board so it slopes up slightly. Sounds simple, but ti much be something that a heavy board won't slide off on a solid stage floor when I push against the pedals at the back where its raised. Must also be something that will fit in a bag with my stuff, so a number of small wedges maybe? Shep[/quote] Quote Link to comment Share on other sites More sharing options...
pantherairsoft Posted June 22, 2011 Share Posted June 22, 2011 That's about th best bet I think. Think I may give up on that idea. I've just upgraded to a Tourman AND a Showman so I can have all my exp pedals and external control units on a board for set up/breakdown ease. I'm ashamed to admit that I eithe need 2 Tourman or to cut some stuff out... Why are MoogerFoogers so bloody big!!!!! Quote Link to comment Share on other sites More sharing options...
EskimoBassist Posted June 22, 2011 Share Posted June 22, 2011 Do not be ashamed! Be proud...and also start doing more back stuff at the gym, cause lugging around two tourmans can only be bad news! Quote Link to comment Share on other sites More sharing options...
pantherairsoft Posted June 22, 2011 Share Posted June 22, 2011 Yup - The current board weighs more than my cab - I'm thinking I need to try and work without some of my pedals for a bit to try and fit them in the Tourman/Showman combo. Quote Link to comment Share on other sites More sharing options...
xgsjx Posted June 22, 2011 Share Posted June 22, 2011 If you're looking for a smaller board, why not rack your moogers & get a multi bypass pedal made that only takes up the space of one slightly largish pedal? If you don't turn the moogs off, then you wouldn't even need that! I know it's still another box, but might make an easier load. Quote Link to comment Share on other sites More sharing options...
pantherairsoft Posted June 22, 2011 Share Posted June 22, 2011 I thought about that solution, but I do turn them on and off, and the cabling from a rack to pedals (as they are at different points of the chain, 1 with an expression pedal, 3 connected to the MP-201) is a logistical nightmare! I need to tweak stuff a my feet live as well. Quote Link to comment Share on other sites More sharing options...
xgsjx Posted June 22, 2011 Share Posted June 22, 2011 You know what you want? Quote Link to comment Share on other sites More sharing options...
pantherairsoft Posted June 22, 2011 Share Posted June 22, 2011 No - I'm a bassist. That is sexy as hell though I'm so ending up with 2 Tourman boards Now just to find stages big enough Quote Link to comment Share on other sites More sharing options...
EskimoBassist Posted June 22, 2011 Share Posted June 22, 2011 [quote name='pantherairsoft' post='1279176' date='Jun 22 2011, 10:43 PM']No - I'm a bassist. That is sexy as he'll though I'm so ending up with 2 Tourman boards Now just to find stages big enough [/quote] Stage? Tell that to Lightening Bolt! Quote Link to comment Share on other sites More sharing options...
.jpg.7e18f76540598a8efc0e6ca9be453059.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.