glassmoon Posted August 27, 2020 Share Posted August 27, 2020 ".. can you tell us about this? > TC Electronic Flashback Delay (always on).. and we can also see you have TonePrint © selected:- 😎" Easy as pie... I use the delay as a means to "fatten" my sound, almost like a reverb... very slight delay and very subtle, but it's definitely there. I started years ago with a chorus, then later a reverb, then after discovering Janek Gwizdala, I switched to delay - and I use his TonePrint, the Sausage & Beer print . I found that the bass was a little "dead" to my ears, hence starting to play with alternate ways to beef it up - I guess that came from listening to a ton of fusion and hearing what I believed was a chorusy sound and loving it BTW - I use the Nathan East print for my chorus 😎 2 Quote Link to comment Share on other sites More sharing options...
fuzzonaut Posted August 27, 2020 Share Posted August 27, 2020 Current state of pedal mayhem at my feet in the rehearsal room. Signal gets split twice (Meatbox, DD7) and ends up in 3 rigs. Main / Sub Left Right 3 Quote Link to comment Share on other sites More sharing options...
jimbobothy Posted August 27, 2020 Share Posted August 27, 2020 ... now THAT is a lot of pedals 😁 👍🏼 Quote Link to comment Share on other sites More sharing options...
mr4stringz Posted August 27, 2020 Share Posted August 27, 2020 (edited) 3 hours ago, fuzzonaut said: Current state of pedal mayhem at my feet in the rehearsal room. Signal gets split twice (Meatbox, DD7) and ends up in 3 rigs. Main / Sub Left Right How you finding the Pessimiser on bass? I’m using a Hilbish Beta preamp and was considering adding one of these in at some point. Edited August 27, 2020 by mr4stringz Quote Link to comment Share on other sites More sharing options...
fuzzonaut Posted August 28, 2020 Share Posted August 28, 2020 12 hours ago, mr4stringz said: How you finding the Pessimiser on bass? I’m using a Hilbish Beta preamp and was considering adding one of these in at some point. It's great, I love it. The EQ section is very powerful providing a wide range of tone shaping possibilities. Together with the clean/dirt blend and the boost you have a very versatile pedal. Recommended. 1 Quote Link to comment Share on other sites More sharing options...
stewblack Posted August 30, 2020 Share Posted August 30, 2020 Put this together as a small board for simple rigs when I don't want to fuss with my bi-amp set up. Not that I seem to be gigging now or anytime soon. But board building is fun isn't it? The ms-60b is set as a Flanger and noise gate. Whole thing is powered by a Harley Benton battery. Quote Link to comment Share on other sites More sharing options...
Bearfist Posted September 5, 2020 Share Posted September 5, 2020 Bit of a work in progress but after the best part of 2 years using modellers im much happier to be using something like this again. 2 Quote Link to comment Share on other sites More sharing options...
HazBeen Posted September 5, 2020 Share Posted September 5, 2020 1 hour ago, Bearfist said: Bit of a work in progress but after the best part of 2 years using modellers im much happier to be using something like this again. Clearly not into Darkglass Quote Link to comment Share on other sites More sharing options...
Salt on your Bass? Posted September 5, 2020 Share Posted September 5, 2020 1 hour ago, Bearfist said: Bit of a work in progress but after the best part of 2 years using modellers im much happier to be using something like this again. Hey man, are you playing for or 5 string? How's the Cali? I have major gas for the large box, even though my board can't take it! Quote Link to comment Share on other sites More sharing options...
Bearfist Posted September 5, 2020 Share Posted September 5, 2020 (edited) 38 minutes ago, HazBeen said: Clearly not into Darkglass Ha! 😁 Although had i got the MBD2 sooner im not sure i would have bothered with the X. 34 minutes ago, Salt on your Bass? said: Hey man, are you playing for or 5 string? How's the Cali? I have major gas for the large box, even though my board can't take it! Yeah mostly 5's. The Cali is amazing, had another big box a few years back and replaced it with the compact version and then a Hyper Luminal and finally the Axe FX comps, as great as all of those are there's something about the big box one ive missed, as soon as i knew i was selling the Axe the first thing i did was hunt down one of these, its worth the extra board size for me. Edited September 5, 2020 by Bearfist 1 Quote Link to comment Share on other sites More sharing options...
jimbobothy Posted September 5, 2020 Share Posted September 5, 2020 (edited) .... I've got a HX Stomp equipped board and an all analogue (well nearly) board as well. I must say I do really like seeing what I can tweak, rather than menu scrolling. Also as there is a bit of option paralysis with Multi FX units, I like the make the most of what you have deal with small/medium analogue set ups. Enjoy Edited September 5, 2020 by jimbobothy Quote Link to comment Share on other sites More sharing options...
jimbobothy Posted September 5, 2020 Share Posted September 5, 2020 ... when using your Quatermaster do you notice a noticeable difference? Quote Link to comment Share on other sites More sharing options...
Bearfist Posted September 5, 2020 Share Posted September 5, 2020 (edited) 22 minutes ago, jimbobothy said: .... I've got a HX Stomp equipped board and an all analogue (well nearly) board as well. I must say I do really like seeing what I can tweak, rather than menu scrolling. Also as there is a bit of option paralysis with Multi FX units, I like the make the most of what you have deal with small/medium analogue set ups. Enjoy Yeah that was one of the biggest issues for me, i just couldnt leave the thing alone, i loved having that control but sometimes i felt i was spending more time tweaking tones then playing, particulry with the Axe Fx where the ability to tweak is insane. I am considering throwing a Stomp on this board however, i need a couple of non distortion FX for a new gig im doing and one of those might just do the trick. 20 minutes ago, jimbobothy said: ... when using your Quatermaster do you notice a noticeable difference? Im just using it to switch between the 3 drives without tap dancing really so yeah in that regard its very helpful, i cant say ive really noticed any difference in tone when using it but it just makes life easier. Edited September 5, 2020 by Bearfist Quote Link to comment Share on other sites More sharing options...
ZenX Posted September 5, 2020 Share Posted September 5, 2020 Slight update (excuse the sock). Got myself a Hypergravity so now the MS-60B is just LPF/Tuner (and as a 'just in case' I suddenly decide I need octave or something...). 1 Quote Link to comment Share on other sites More sharing options...
jimbobothy Posted September 5, 2020 Share Posted September 5, 2020 (edited) 8 hours ago, Bearfist said: Yeah that was one of the biggest issues for me, i just couldnt leave the thing alone, i loved having that control but sometimes i felt i was spending more time tweaking tones then playing, particulry with the Axe Fx where the ability to tweak is insane. I am considering throwing a Stomp on this board however, i need a couple of non distortion FX for a new gig im doing and one of those might just do the trick. Im just using it to switch between the 3 drives without tap dancing really so yeah in that regard its very helpful, i cant say ive really noticed any difference in tone when using it but it just makes life easier. Cheers for the reply Bearfist. The Stomp is SO versatile in such a small package. I’ve got mine set up, with amongst a few other things, a Aguilar Filter Twin and BOSS OC2 in the FX L and FX R loops. Those along side the digital effects you have more than enough to play with 👍🏼 Edited September 5, 2020 by jimbobothy 1 Quote Link to comment Share on other sites More sharing options...
jimbobothy Posted September 5, 2020 Share Posted September 5, 2020 (edited) ... also the Quartermaster seems like a great idea, but to get the most out of one I’d need a much bigger board 😁 Edited September 5, 2020 by jimbobothy 1 Quote Link to comment Share on other sites More sharing options...
stewblack Posted September 5, 2020 Share Posted September 5, 2020 4 hours ago, ZenX said: now the MS-60B is just LPF/Tuner (and as a 'just in case' I suddenly decide I need octave or something A Zoom of one kind or another sits in all my pedal board set ups. Its just as you say, a great back up or extra. Even if it's just HPF and tuner it's paid for itself Quote Link to comment Share on other sites More sharing options...
Higgie Posted September 8, 2020 Share Posted September 8, 2020 Hastily slapped this together as I won't get a chance now before Saturday's gig, and I wanted to get the Morningstar ML5 wired up. Only wired up two loops, and will be spending tomorrow programming all the patches for the board, but I can see some pretty cool possibilities here already! Bass > Cali76 > ML5 > HX Stomp Loop C - Aguilar Octamizer Loop E - Dr Scientist Dusk HX Stomp FX Loop - Pickle/Muff DIY build (Under the top tier) MIDI chain - MC8 > Hx Stomp > ML5 > Dusk Mission Expressionator connects the Dunlop Mini Expression to the Stomp, MC8, and Dusk Powered by 2 GigRig Generators (One for the Stomp, the other for everything else) Quote Link to comment Share on other sites More sharing options...
Quatschmacher Posted September 10, 2020 Share Posted September 10, 2020 On 08/09/2020 at 21:15, Higgie said: Hastily slapped this together as I won't get a chance now before Saturday's gig, and I wanted to get the Morningstar ML5 wired up. Only wired up two loops, and will be spending tomorrow programming all the patches for the board, but I can see some pretty cool possibilities here already! Bass > Cali76 > ML5 > HX Stomp Loop C - Aguilar Octamizer Loop E - Dr Scientist Dusk HX Stomp FX Loop - Pickle/Muff DIY build (Under the top tier) MIDI chain - MC8 > Hx Stomp > ML5 > Dusk Mission Expressionator connects the Dunlop Mini Expression to the Stomp, MC8, and Dusk Powered by 2 GigRig Generators (One for the Stomp, the other for everything else) How are you enjoying the Dusk? Quote Link to comment Share on other sites More sharing options...
Quatschmacher Posted September 10, 2020 Share Posted September 10, 2020 (edited) Need to wire this beast up after getting a bigger power supply. Still need space for the Nemesis, Ventris, EQ2, Sentry and MC8. Bit of a headache. Edited September 10, 2020 by Quatschmacher 1 Quote Link to comment Share on other sites More sharing options...
Hugsonic Posted September 10, 2020 Share Posted September 10, 2020 Gonna need a bigger board. Quote Link to comment Share on other sites More sharing options...
Quatschmacher Posted September 10, 2020 Share Posted September 10, 2020 5 minutes ago, Hugsonic said: Gonna need a bigger board. Or some focused culling. Quote Link to comment Share on other sites More sharing options...
ped Posted September 10, 2020 Share Posted September 10, 2020 Sort of a pedalboard but I don't use my feet unless I'm angry USB Mug Warmer - TC Ditto - Future impact - Source Audio C4 - Roland VB99 Quote Link to comment Share on other sites More sharing options...
NoirBass Posted September 10, 2020 Share Posted September 10, 2020 31 minutes ago, ped said: Sort of a pedalboard but I don't use my feet unless I'm angry USB Mug Warmer - TC Ditto - Future impact - Source Audio C4 - Roland VB99 Love it! Any thoughts on upgrading to an SY-1000? Quote Link to comment Share on other sites More sharing options...
Higgie Posted September 10, 2020 Share Posted September 10, 2020 1 hour ago, Quatschmacher said: How are you enjoying the Dusk? It’s a cool pedal. Not entirely sold on it, but in all fairness it hasn’t really been put through its paces yet, so there’s still time! 1 Quote Link to comment Share on other sites More sharing options...
.jpg.7e18f76540598a8efc0e6ca9be453059.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.