Post your pedal board - Basschat style!!

[Chienmortbb]

1 hour ago, FretsOnFire said:

Scaled back my board to just a compressor, overdrive and DI with a tuner just off screen 

 

What Tuner are you using?

 

[FretsOnFire]

28 minutes ago, Chienmortbb said:

What Tuner are you using?

 

Nothing special just a Polytune 

[neepheid]

Ch-ch-ch-ch-changes.  Decided to up my pitch shifting game (as well as eliminate a single point of failure - I've become utterly dependent upon the pitch shifter for the "can you raise/lower this song by x semitones?" requests), so I got a TC Electronic Brainwaves.  I nearly didn't get one, because on the face of it it didn't do a single semitone shift.  But with Toneprint trickery, you can assign a single custom interval to each voice.  It's a little odd in that the one is right at the sweep of the knob instead of its rightful place between unison and 2, but I can live with it.  Hotone Harmony has been relegated to detune ("chorus") duties, but if anything went on the wonk with the Brainwaves then it could be pressed back into service as pitch shifter.

 

So, yet another reorganisation required...

 

 

 

I'd like to say "that's it", never say never but but to go much further, I think I'd need a bigger pedalboard.

[MrDinsdale]

3 hours ago, tayste_2000 said:

 

Nudge that tuner up to the top of the board and it can all squish up a bit more and you might be able to avoid the overhang that I know is bothering you.

I know, but if I move them up, the jacks don't fit through the gaps in the pedalboard. I'm not going to lie, I'm already considering moving up to the 3.0 and getting some more pedals in the mix while I'm experimenting.

This RB 2.1 is just a touch too small. The perfect compact gig board would be a 2.2, with a hole cut out to mount one of the RB Mod patch bays. That'd leave enough room for this, plus a fun pedal like the OC5 or maybe an HX One.

 

[tayste_2000]

1 hour ago, MrDinsdale said:

I know, but if I move them up, the jacks don't fit through the gaps in the pedalboard. I'm not going to lie, I'm already considering moving up to the 3.0 and getting some more pedals in the mix while I'm experimenting.

This RB 2.1 is just a touch too small. The perfect compact gig board would be a 2.2, with a hole cut out to mount one of the RB Mod patch bays. That'd leave enough room for this, plus a fun pedal like the OC5 or maybe an HX One.

 

 

XPND 😉

[krispn]

On 27/03/2025 at 11:40, MrDinsdale said:

Just picked up The Accountant and Opus for a compact board. Still not got velcro on etc. 

 

 

Really liked the power amp simulation available on Two Notes Genome so decided to bite the bullet and grab the Opus. This will be perfect for a couple of musical project potential on the horizon, the QC is great but it makes for a big board once Ive added some extra pedals. 

I swapped out my Element for a 2Notws CabM+ I got for a steal and it’s class. I really like the Mesa cabs. I usually play a Tecamp 212m cab and the Mesa 212 IR sounds great to my ears. 

[MrDinsdale]

4 minutes ago, krispn said:

I swapped out my Element for a 2Notws CabM+ I got for a steal and it’s class. I really like the Mesa cabs. I usually play a Tecamp 212m cab and the Mesa 212 IR sounds great to my ears. 

Did you buy the DynIR Mesa cabs or are you using other IRs? Very impressed so far, particularly the power amp sims. Not digging the bundled DynIR but everything else is great. 

[krispn]

2 hours ago, MrDinsdale said:

Did you buy the DynIR Mesa cabs or are you using other IRs? Very impressed so far, particularly the power amp sims. Not digging the bundled DynIR but everything else is great. 

 Yeah bought the DynIR Mesa pack. Think I had a discount code. It’s not that the Element is bad and I really dig it’s simplicity but having loaded up some of my existing IRs and then using the Mesa ones I’m super happy. 

[krispn]

2 hours ago, MrDinsdale said:

Did you buy the DynIR Mesa cabs or are you using other IRs? Very impressed so far, particularly the power amp sims. Not digging the bundled DynIR but everything else is great. 

 

I suppose that warrants an update pic! Still need to lock things down as I recently got the MojoMojo 

 

[Paddy777]

1 hour ago, krispn said:

I suppose that warrants an update pic! Still need to lock things down as I recently got the MojoMojo 

 

 

I would LOVE a Jule Simone - seriously considering ordering one later in the year, what do you make of it?

[LukeFRC]

1 hour ago, Paddy777 said:

 

I would LOVE a Jule Simone - seriously considering ordering one later in the year, what do you make of it?

I imagine Krispn would say
"I love it so much that I mount it straight on my board. Everything I'm on the fence about goes on an angle, but the for the Simone, I got my set square out."

[Paddy777]

3 hours ago, LukeFRC said:

I imagine Krispn would say
"I love it so much that I mount it straight on my board. Everything I'm on the fence about goes on an angle, but the for the Simone, I got my set square out."

😂😂😂😂 that actually made me LOL 😁 

[krispn]

 

 

8 hours ago, Paddy777 said:

 

I would LOVE a Jule Simone - seriously considering ordering one later in the year, what do you make of it?

 

The Simone is lovely sounding. The eq is boost/cut so you do get additional volume as you dial it up but that is no bad thing as it’s very easy to sound good with boosted settings or most settings for that matter.
 

I had a Monique M700 for a number of years when I was doing bigger gigs and the Sensitivity control is a real key to ‘voicing’ of the amp and Simone shares this function. It just makes the unit more touch responsive and feel ‘hotter’ - I believe it’s like an impedance control so it opens up the signal coming through or some wizardry. Basically it sounds good!

 

 

The Hondo Felder demo is very accurate. I often A/B Simone with other preamps etc and it always just sounds ‘better’. I have it set up so that it’s nice and straight in my board and not all wonky. Seriously tho On my board I take the DI out into the HL comp and then into the Cab M+ and the DI sound is class. The 1/4” out just runs across the signal chain to the amp and again sounds class. I use a Fender Rumble 500 210 combo and prefer the Simone into the regular input rather than the fx loop - I’ve done all that type of experimenting at home with most gear 😀

 

[MrDinsdale]

 

New day, new board! 👌 I love all these pedals so much it's too hard to pick a few for a compact board. 

[LukeFRC]

1 minute ago, MrDinsdale said:

 

New day, new board! 👌 I love all these pedals so much it's too hard to pick a few for a compact board. 

I think we started off at “compact” a few posts ago… 

[krispn]

10 minutes ago, MrDinsdale said:

 

New day, new board! 👌 I love all these pedals so much it's too hard to pick a few for a compact board. 

 

That escalated!!!

[MrDinsdale]

34 minutes ago, LukeFRC said:

I think we started off at “compact” a few posts ago… 

I'm not well.

[MrDinsdale]

28 minutes ago, krispn said:

 

That escalated!!!

Haha I know, couldn't decide which combo I wanted to keep and realised I'm not emotionally ready to commit to a compact board 🫠

[tayste_2000]

1 hour ago, MrDinsdale said:

Haha I know, couldn't decide which combo I wanted to keep and realised I'm not emotionally ready to commit to a compact board 🫠

My work around is to have 4 compact boards 

[MrDinsdale]

42 minutes ago, tayste_2000 said:

My work around is to have 4 compact boards 

So that's why you're stockpiling Elements 🤣

 

Seriously though I'd love to at least have a Model FeT and a Mother board, they're both excellent but having both on a board seems a little silly.

[Bagman]

Nice email from Diamond- SGFX today 

 

 

[Bagman]

I’m using the Beta V and Diamond Comp with my passive Warwick 5 (strung with Chromes). 
 

I like it