pantherairsoft Posted January 13, 2012 Share Posted January 13, 2012 [quote name='xgsjx' timestamp='1326457617' post='1497414'] It could be used as a mono cable but if you used it for stereo, only one channel would come through. I used stereo jacks as the mono jack would have shorted the R & S together & I didn't know if that would still work (aparantly it still does). Have you tried using the ENV Out on something that regulates speed, like the 108s speed? [/quote] I use the same George L's to connect them that I patch all my pedals together with!? I tried the ENV Out into the rate of the Phaser but was a bit under whelmed. I haven't tried it with the Cluster Flux yet so I'll report back when I'm at the studio next! Quote Link to comment Share on other sites More sharing options...
xgsjx Posted January 13, 2012 Share Posted January 13, 2012 Just a thought, a on/off switch in the middle of the patch lead would be a useful thing. Or you could patch to a looper. Quote Link to comment Share on other sites More sharing options...
pantherairsoft Posted January 13, 2012 Share Posted January 13, 2012 [quote name='xgsjx' timestamp='1326458483' post='1497435'] Just a thought, a on/off switch in the middle of the patch lead would be a useful thing. Or you could patch to a looper. [/quote] Cool idea! A Jack-Jack adapter with a kill switch on it would work! Quote Link to comment Share on other sites More sharing options...
RandomProddy Posted January 13, 2012 Share Posted January 13, 2012 (edited) A modified piano sustain pedal should do the trick. (come to think of it, an FS-5u/l or equivalent..) Edited January 13, 2012 by RandomProddy Quote Link to comment Share on other sites More sharing options...
deej Posted January 13, 2012 Share Posted January 13, 2012 (edited) [quote name='chrismuzz' timestamp='1326452619' post='1497327'] I'm thinking of getting rid of some of my pedals for a Line 6 M9. Mainly for Delay/Reverb, chorus, and phaser... Does anyone have any experience with them? What are the compression models like? Im using an Agular TLC at the moment so not expecting to be blown away! And would there be a dirt setting that could replace the Bass Big Muff Pi? [/quote] The M9 is excellent for delays and reverb. The modulation on it is ok. Its not great but its not bad either, just...alright. I havnt tried the compression on it but I dont rate the dirt at all, they all feel really thin and tame to me. Its a pedal you can get a lot of use out of and I reckon its worth going for. Ive put mine back on my board again recently and it just gives me a few extra options than the space with my singles does. Add in some easy tap tempo and the ability to change any parameter with an expression pedal, and it means you have a lot of options at your feet. I was thinking of selling mine at one point but im glad I didnt now. Its a good complement to the pedals I have. Edited January 13, 2012 by deej Quote Link to comment Share on other sites More sharing options...
chrismuzz Posted January 14, 2012 Share Posted January 14, 2012 Thanks deej! I was planning to keep my sansamp and Marshall pedals anyway... Possibly my tuner too as the LCD screen on the M9 looks like it won't be so easy to read on a gig! I'm supposed to be convincing myself not to get more stuff but... Never quite works out Quote Link to comment Share on other sites More sharing options...
deej Posted January 14, 2012 Share Posted January 14, 2012 Yeah i'd keep the tuner, the one on the M9 is all over the place when you tune! My board is basically dirt pedals and a filter with the M9 as I find they're the weakest things about it. The looper is also good fun, its really easy to use and I find it useful for playing around with song ideas on my own too. Quote Link to comment Share on other sites More sharing options...
Higgie Posted January 16, 2012 Share Posted January 16, 2012 Finally loaded up my Pedaltrain Nano with the bare essentials. [IMG]http://i22.photobucket.com/albums/b341/Higgie123/Bass%20Stuff/My%20Rig/Nov-Dec%202011/IMG_0076.jpg[/IMG] Sadowsky Pre-Amp/DI with Korg DT-10BK on the Tuner Out, into Aguilar TLC, into MojoHand Cream Pie. Sorry for the crappy pic. iPod Touch strikes again!! All powered by a Johnnyshredfreak power supply. I'm thinking of getting another couple of Nanos and going with a modular setup. Seeing as a Nano will fit 4 regular sized pedals, that will always leave a spare output on the Daisy chain so I could power more than one board with one power supply. All held down with Pedalboard Tape (ripped all the velcro off the board and pedals. It's brilliant stuff, can't believe how strong it is!) and wired up with George L's. Quote Link to comment Share on other sites More sharing options...
BigBassBob Posted January 16, 2012 Share Posted January 16, 2012 I like it, Higgie! Quote Link to comment Share on other sites More sharing options...
Gunsfreddy2003 Posted January 16, 2012 Share Posted January 16, 2012 [quote name='Higgie' timestamp='1326673886' post='1500441'] Finally loaded up my Pedaltrain Nano with the bare essentials. Wot no envelope filter?!!! Is that the tape from the GigRig? Sadowsky Pre-Amp/DI with Korg DT-10BK on the Tuner Out, into Aguilar TLC, into MojoHand Cream Pie. Sorry for the crappy pic. iPod Touch strikes again!! All powered by a Johnnyshredfreak power supply. I'm thinking of getting another couple of Nanos and going with a modular setup. Seeing as a Nano will fit 4 regular sized pedals, that will always leave a spare output on the Daisy chain so I could power more than one board with one power supply. All held down with Pedalboard Tape (ripped all the velcro off the board and pedals. It's brilliant stuff, can't believe how strong it is!) and wired up with George L's. [/quote] Quote Link to comment Share on other sites More sharing options...
cheddatom Posted January 16, 2012 Share Posted January 16, 2012 I spent some time before my gig on Saturday and actually cut down to 11 pedals - the least i've played with in at least 7 years. It was quite refreshing and deffinitely a lot lighter. And I could carry it with one hand if my back wasn't knackered! Quote Link to comment Share on other sites More sharing options...
I am not excane Posted January 16, 2012 Share Posted January 16, 2012 [quote name='Higgie' timestamp='1326673886' post='1500441'] Finally loaded up my Pedaltrain Nano with the bare essentials. Sadowsky Pre-Amp/DI with Korg DT-10BK on the Tuner Out, into Aguilar TLC, into MojoHand Cream Pie. Sorry for the crappy pic. iPod Touch strikes again!! All powered by a Johnnyshredfreak power supply. I'm thinking of getting another couple of Nanos and going with a modular setup. Seeing as a Nano will fit 4 regular sized pedals, that will always leave a spare output on the Daisy chain so I could power more than one board with one power supply. All held down with Pedalboard Tape (ripped all the velcro off the board and pedals. It's brilliant stuff, can't believe how strong it is!) and wired up with George L's. [/quote] Nice! I like the choice of pedals.... How about a Korg Pitchblack or Polytune - something smaller? You then might be able to fit another pedal on there and we all know MOAR IS BETTER Quote Link to comment Share on other sites More sharing options...
Higgie Posted January 16, 2012 Share Posted January 16, 2012 [quote name='BigBassBob' timestamp='1326688090' post='1500494'] I like it, Higgie! [/quote] Thanks mate! [quote name='Gunsfreddy2003' timestamp='1326694638' post='1500497'] Wot no envelope filter?!!! Is that the tape from the GigRig? [/quote] Well I do love my filters, but sadly it's not a "Bare Essential". That's what makes me want to get another couple of PT Nanos. I could have one with the Octamizer, and XBlender with my Swollen Pickle clone and Filter Twin in the loop. And another with my Analogman Chorus, Subdecay Baby Quasar, Atomic Echo clone delay, etc. And just pick and choose which boards I use for which gigs! And as for the tape, I'm pretty sure it's the same stuff, but I got it off of eBay from a seller called Audio Spares. [quote name='I am not excane' timestamp='1326724604' post='1501019'] Nice! I like the choice of pedals.... How about a Korg Pitchblack or Polytune - something smaller? You then might be able to fit another pedal on there and we all know MOAR IS BETTER [/quote] Thanks, it's a great little board. I was thinking of that, my Dad has a Pitchblack, but the fact is I love the Blue and White LED's of the DT-10BK! I'm not sure how much space would be saved, seeing as the other pedals have their jacks on the side and the DT-10 has them on top, allowing me to have no gap between pedals. And I'm also no stranger to the concept of MOAR, my last board was a PT-2 with 13 pedals on it Quote Link to comment Share on other sites More sharing options...
pantherairsoft Posted January 16, 2012 Share Posted January 16, 2012 That tape is almost identical to the GigRig stuff, from the same factory if I recall. I can vouch for the AudioSpares stuff - I used to work for them, and both my sister AND my drummer still do work for them! Personally - I still prefer the industrial strength Velcro. Quote Link to comment Share on other sites More sharing options...
Higgie Posted January 16, 2012 Share Posted January 16, 2012 Oh cool! Any chance of a BC'ers discount then? Quote Link to comment Share on other sites More sharing options...
pantherairsoft Posted January 16, 2012 Share Posted January 16, 2012 I can likely get you a 10% discount code for orders direct from the website Quote Link to comment Share on other sites More sharing options...
AndyW Posted January 16, 2012 Share Posted January 16, 2012 [quote name='Higgie' timestamp='1326736202' post='1501302'] Thanks, it's a great little board. I was thinking of that, my Dad has a Pitchblack, but the fact is I love the Blue and White LED's of the DT-10BK! I'm not sure how much space would be saved, seeing as the other pedals have their jacks on the side and the DT-10 has them on top, allowing me to have no gap between pedals. [/quote] Blue LED's, yeah baby! Just like the Hand dryers in the pub at King's Cross! haha! ;o) Still gotta try the 'mythical' Cream Pie out sometime. Quote Link to comment Share on other sites More sharing options...
xgsjx Posted January 17, 2012 Share Posted January 17, 2012 New homebuilt router on board & new layout. Sounds pretty awesome. [url=http://www.flickr.com/photos/xgsjx/6711384757/][/url] [url=http://www.flickr.com/photos/xgsjx/6711372259/][/url] Shep would have a field day with my wiring (either that, or a heart attack!). Quote Link to comment Share on other sites More sharing options...
Higgie Posted January 17, 2012 Share Posted January 17, 2012 [quote name='pantherairsoft' timestamp='1326751900' post='1501633'] I can likely get you a 10% discount code for orders direct from the website [/quote] Fantastic! I think I'm gonna be using a lot of it in the future so that would be awesome, thanks Shep! [quote name='AndyW' timestamp='1326756603' post='1501702'] Blue LED's, yeah baby! Just like the Hand dryers in the pub at King's Cross! haha! ;o) Still gotta try the 'mythical' Cream Pie out sometime. [/quote] Haha, the very same!! You're more than welcome to come and try it mate. Quote Link to comment Share on other sites More sharing options...
pantherairsoft Posted January 17, 2012 Share Posted January 17, 2012 [quote name='xgsjx' timestamp='1326761008' post='1501749'] New homebuilt router on board & new layout. Sounds pretty awesome. Shep would have a field day with my wiring (either that, or a heart attack!). [/quote] Let me at it, let me at it!!!!!! Quote Link to comment Share on other sites More sharing options...
pantherairsoft Posted January 17, 2012 Share Posted January 17, 2012 [quote name='Higgie' timestamp='1326767698' post='1501771'] Fantastic! I think I'm gonna be using a lot of it in the future so that would be awesome, thanks Shep! [/quote] AudioSpares.co.uk Discount Code: ASE10CE. Vlid until End of March. 10% off. Multiple use. Stock up on Neutrik jack-jack cable Quote Link to comment Share on other sites More sharing options...
Higgie Posted January 17, 2012 Share Posted January 17, 2012 [quote name='pantherairsoft' timestamp='1326807396' post='1502157'] AudioSpares.co.uk Discount Code: ASE10CE. Vlid until End of March. 10% off. Multiple use. Stock up on Neutrik jack-jack cable [/quote] Shep, you are a legend Quote Link to comment Share on other sites More sharing options...
pantherairsoft Posted January 17, 2012 Share Posted January 17, 2012 I try Quote Link to comment Share on other sites More sharing options...
phil.i.stein Posted January 17, 2012 Share Posted January 17, 2012 [quote name='pantherairsoft' timestamp='1326807396' post='1502157'] AudioSpares.co.uk Discount Code: ASE10CE. Vlid until End of March. 10% off. [b]Multiple use.[/b] Stock up on Neutrik jack-jack cable [/quote] ..hope you're not just talking about that extra-strong tape there mate... your GF may be in trouble.. Quote Link to comment Share on other sites More sharing options...
pantherairsoft Posted January 17, 2012 Share Posted January 17, 2012 Si, I've read your last post about 20 times, and whilst I may be having a blonde moment, I have to say, I'm lost! Oh, and I'm married - so don't mention my GF in public lol Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.