BigBeatNut Posted May 16, 2012 Share Posted May 16, 2012 (edited) [quote name='pantherairsoft' timestamp='1337188730' post='1656935'] I'm going to add a Mooer Pitch Box which is tiny for the 2 octave up stuff... [/quote] [quote name='0175westwood29' timestamp='1337189250' post='1656953'] i had a look at them this morning, didnt have time to check out the samples! [/quote] The only samples I know about are [url="http://www.talkbass.com/forum/f36/tiny-pedals-1590a-pedals-833936/index15.html#post12573928"]HERE[/url]. If anyone can point me at any more I'd be grateful, because it doesn't sound like what I want so far. (Which is an OC-2 style 1-octave down ... just that) Edited May 16, 2012 by BigBeatNut Quote Link to comment Share on other sites More sharing options...
pantherairsoft Posted May 16, 2012 Share Posted May 16, 2012 There are no samples at the mo. I'll do some when it arrives. Quote Link to comment Share on other sites More sharing options...
BigBeatNut Posted May 16, 2012 Share Posted May 16, 2012 Many thanks ... Quote Link to comment Share on other sites More sharing options...
pantherairsoft Posted May 16, 2012 Share Posted May 16, 2012 I mentioned to them that they coul really do with some audio and they seemed to think that was a mammoth task. I suggested I'd do a review/demo and they seemed quite excited about it. I'm sure the octave up stuff will sound great - the octave down will be the telling point! Quote Link to comment Share on other sites More sharing options...
Al Heeley Posted May 18, 2012 Share Posted May 18, 2012 A little shuffle round for tonights gig, some more homebrews sneaking on there. [url=http://www.flickr.com/photos/alheeley/7217389912/][/url] Quote Link to comment Share on other sites More sharing options...
BigBeatNut Posted May 18, 2012 Share Posted May 18, 2012 I still have to wire up the daisy chain and velcro it down, but you get the idea .... So tell me, when it comes to velcro, is there any good reason to do spiky side on pedals, soft side on board, or the other way round ... or doesn't it matter at all ? Quote Link to comment Share on other sites More sharing options...
chrismuzz Posted May 18, 2012 Share Posted May 18, 2012 [quote name='BigBeatNut' timestamp='1337375525' post='1659167'] I still have to wire up the daisy chain and velcro it down, but you get the idea .... So tell me, when it comes to velcro, is there any good reason to do spiky side on pedals, soft side on board, or the other way round ... or doesn't it matter at all ? [/quote] Haha how cute When you buy pre-made pedalboards, they have the soft side on them already, so I guess it's generally the norm to stick the spiky side on the pedals Quote Link to comment Share on other sites More sharing options...
Al Heeley Posted May 18, 2012 Share Posted May 18, 2012 i always prefer the spiky side on the pedals then they stick to the carpet when i'm playing with them off-board. Sweet selection of SFX micros there Quote Link to comment Share on other sites More sharing options...
Bigwan Posted May 19, 2012 Share Posted May 19, 2012 [quote name='BigBeatNut' timestamp='1337375525' post='1659167'] I still have to wire up the daisy chain and velcro it down, but you get the idea .... So tell me, when it comes to velcro, is there any good reason to do spiky side on pedals, soft side on board, or the other way round ... or doesn't it matter at all ? [/quote] The OCD in me says you need a set square!!! Sweet little collection! Quote Link to comment Share on other sites More sharing options...
Thor Posted May 19, 2012 Share Posted May 19, 2012 [quote name='Bigwan' timestamp='1337414502' post='1659454'] The OCD in me says you need a set square!!! Sweet little collection! [/quote] I'm glad it's not just me regarding the OCD thing! Quote Link to comment Share on other sites More sharing options...
BigBeatNut Posted May 19, 2012 Share Posted May 19, 2012 [quote name='Bigwan' timestamp='1337414502' post='1659454'] The OCD in me says you need a set square!!! [/quote] They won't stay straight ... no velcro yet, just checking the layout. Quote Link to comment Share on other sites More sharing options...
pantherairsoft Posted May 19, 2012 Share Posted May 19, 2012 Really dig the mini board dude! Quote Link to comment Share on other sites More sharing options...
BigBeatNut Posted May 19, 2012 Share Posted May 19, 2012 [quote name='pantherairsoft' timestamp='1337427249' post='1659736'] Really dig the mini board dude! [/quote] Cheers Silly thing is, that even at that size I'll have major problems fitting it into my space on the stage I most often play on. Quote Link to comment Share on other sites More sharing options...
chrismuzz Posted May 19, 2012 Share Posted May 19, 2012 Quick and dirty Might try putting the Jackhammer in front of the Sansamp again.. also awaiting delivery of a Stageclix Jack! Quote Link to comment Share on other sites More sharing options...
dannybuoy Posted May 19, 2012 Share Posted May 19, 2012 [quote name='Al Heeley' timestamp='1337384170' post='1659308'] i always prefer the spiky side on the pedals then they stick to the carpet when i'm playing with them off-board.[/quote] I use spiky side on the pedals and that's the one thing that annoys me about them - I don't want them to stick to the carpet! The other reason to go that way is that most others do too, so if you buy a used pedal with velcro already on, you are ready to rock. Quote Link to comment Share on other sites More sharing options...
rushbo Posted May 20, 2012 Share Posted May 20, 2012 [quote name='BigBeatNut' timestamp='1337375525' post='1659167'] I still have to wire up the daisy chain and velcro it down, but you get the idea .... So tell me, when it comes to velcro, is there any good reason to do spiky side on pedals, soft side on board, or the other way round ... or doesn't it matter at all ? [/quote] Ahw man that looks gorgeous! As for lashing the pedals down, you can't beat cable ties IMHO, although with a selection of pedals like that which is almost an Art installation, you'd have to be really careful what colour ties to use. I really should get out more..... Quote Link to comment Share on other sites More sharing options...
1976fenderhead Posted May 21, 2012 Share Posted May 21, 2012 [quote name='chrismuzz' timestamp='1337461114' post='1660541'] Quick and dirty Might try putting the Jackhammer in front of the Sansamp again.. also awaiting delivery of a Stageclix Jack! [/quote] I like that, good thoughtful choice of what not to replace with the B3. Quote Link to comment Share on other sites More sharing options...
chrismuzz Posted May 21, 2012 Share Posted May 21, 2012 [quote name='1976fenderhead' timestamp='1337616539' post='1662857'] I like that, good thoughtful choice of what not to replace with the B3. [/quote] Thanks I was actually a bit tempted to replace the compressor too because the B3 ones are very impressive! Quote Link to comment Share on other sites More sharing options...
Sibob Posted May 23, 2012 Share Posted May 23, 2012 So here is Pedal-Board 2, Ver. 1 Un-velcroed and messy....but working a treat. [url="http://imageshack.us/photo/my-images/15/pedalboardp.jpg/"][/url] Uploaded with [url="http://imageshack.us"]ImageShack.us[/url] Chain: Bass -> LS-2 In Loops A Send -> OC-2 -> CE-2B -> BF-2B Flanger -> GEB-7 -> Behringer Vibrato -> Return Loop B Send - TU-2 Tuner -> CS-2 Compression -> CoPilot Orbit -> Polish Love -> PH-2 Phaser -> PN-2 Trem/Pan -> GE-7B -> Source Audio BEF -> Return LS-2 Out -> Akai Headrush -> Ernie Ball Volume -> LM-2 Limiter Amp Phew LS-2 will move for a SFX Loop Logic soon Si Quote Link to comment Share on other sites More sharing options...
Bigwan Posted May 23, 2012 Share Posted May 23, 2012 [quote name='Sibob' timestamp='1337778293' post='1665284'] So here is Pedal-Board 2, Ver. 1 Un-velcroed and messy....but working a treat. [url="http://imageshack.us/photo/my-images/15/pedalboardp.jpg/"][/url] Uploaded with [url="http://imageshack.us"]ImageShack.us[/url] Chain: Bass -> LS-2 In Loops A Send -> OC-2 -> CE-2B -> BF-2B Flanger -> GEB-7 -> Behringer Vibrato -> Return Loop B Send - TU-2 Tuner -> CS-2 Compression -> CoPilot Orbit -> Polish Love -> PH-2 Phaser -> PN-2 Trem/Pan -> GE-7B -> Source Audio BEF -> Return LS-2 Out -> Akai Headrush -> Ernie Ball Volume -> LM-2 Limiter Amp Phew LS-2 will move for a SFX Loop Logic soon Si [/quote] Is that a tat on your left foot or have you dropped something heavy on it? Can't tell on my phone screen... Quote Link to comment Share on other sites More sharing options...
Sibob Posted May 23, 2012 Share Posted May 23, 2012 It's a Namakubi tattoo Si Quote Link to comment Share on other sites More sharing options...
LiamPodmore Posted May 23, 2012 Share Posted May 23, 2012 Anyone know if the Harely Benton (Thomann) PowerPlant Junior ships with a UK power lead when you order it from over here? I emailed Thomann a few days ago about it and am yet to have a reply, and this looks like it'l fit my needs quite well too. Liam Quote Link to comment Share on other sites More sharing options...
dudewheresmybass Posted May 23, 2012 Author Share Posted May 23, 2012 Thomann don't normally send a uk lead. All the electrical bits I've had from them have come with eu cables. It'll only cost you a quid from wilkinsons for a plug anyway Quote Link to comment Share on other sites More sharing options...
EskimoBassist Posted May 23, 2012 Share Posted May 23, 2012 [quote name='Sibob' timestamp='1337780781' post='1665351'] It's a Namakubi tattoo Si [/quote] I was going to say, I thought my feet were hairy! How come some of your pedals are mounted on paper by the way? Quote Link to comment Share on other sites More sharing options...
Sibob Posted May 23, 2012 Share Posted May 23, 2012 Because some have velcro on, and I was still arranging/cabling/powering....didn't want them to stick down just yet Si Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.